PulsaLift™800Plus PoleSystem

Use your CableMaster™ C-Plus® or

CableMaster™800 Plus with the flexible

PulsaLift™ Plus Pole System for complete

overhead installation without the need for

scissor lift equipment.

• Permanent cable suspension to

concrete & steel

• Pipe suspension to concrete & steel

• Fire & security cabling

• Temporary cable suspension

COMPONENTS                 

DESCRIPTION

CRADLECM800PLUS

Cradle only

V4-3

0.9 metre (3 foot)

Pole with Trigger

V4-EXT

0.9 metre (3 foot)

Extension Pole without

Trigger

PL800PLUS

Complete Kit

(Tool not included)

CRADLECM800PLUS is compatible with the CM800PLUS

and CMCPLUS tool.

SAFETY WARNING

Never hold onto the triggering section of the pole whilst loading

clips or fasteners into the tool. Inadvertent activation can result

in severe injury. Only ever fire the tool overhead while using the

pole system.

1

2

3

INSTALLATION

The PulsaLift™ 800 Plus cradle consists of 2 elements: the cup

and the retaining bolt (tethered to the cup with a steel cable).

1. Place the back of the tool (black cap

first) into the cup. Make sure that the

tool is fully seated.

2. Press the button of the retaining bolt

(to disengage the ball bearings) and

push the retaining bolt through the

holes in the cage provided over the

trigger. Release the retaining bolt

button while making sure that the

ball bearings have engaged on the

other side of the holes.

3. Depending upon the application

height, choose whether the

extension pole is required or just the

triggering pole.

CableMaster™ 800 Plus cradle insert

Part Number L1 and R1 (pictured in orange).

CableMaster™ C-Plus® cradle insert

Part Number LHINSERT (pictured in orange).

OPERATION

1.

Load the tool (avoid applying pressure to the trigger when

doing so).

2. Hold the pole and tool vertically upwards.

3. Push the tool against the work surface to close the fastener

guide of the tool.

4. Use the trigger on the pole to apply more pressure to the

work surface to fire the tool.