Locknut (included with all models)

8.0 mm

(0.32")

24.2 mm

(0.95")

Washer (included with all models)

1.6 mm

(0.06")

Ø 17.8 mm

(0.70")

Ø 23.9 mm

(0.94")

M3 Hardware Packet Contents:

•

2 – M3 x 0.5 x 20 mm SS

Screw

•

2 – M3 x 0.5 SS Hex Nut

•

2 – M3 SS Washer

Performance Curves

Performance is based on a 90% reflectance white test card.

Excess Gain

Beam Pattern

1

10

100

10 mm

(0.4")

100 mm

(4.0")

1000 mm

(40.0")

1 mm

(0.04")

1000

DISTANCE

QS18..LD

300 mm

(11.8")

240 mm

(9.45")

180 mm

(7.09")

120 mm

(4.72")

60 mm

(2.36")

0

0

1 mm

2 mm

3 mm

1 mm

2 mm

3 mm

0

0.04"

0.08"

0.12"

0.04"

0.08"

0.12"

DISTANCE

QS18..LD

Description of Laser Classes

Class 1 Lasers

Class 1 lasers are lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical

instruments for intrabeam viewing.

Reference IEC 60825-1:2001, Section 8.2.

Class 1 Laser Characteristics: See Specifications.

CAUTION: Do Not Disassemble for Repair

This device contains no user-serviceable components. Do not

attempt to disassemble for repair. Use of controls or

adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure. A

defective unit must be returned to the manufacturer.

For Safe Laser Use (Class 1 or Class 2):

•

Do not stare at the laser.

•

Do not point the laser at a person’s eye.

•

Mount open laser beam paths either above or below eye level, where practical.

•

Terminate the beam emitted by the laser product at the end of its useful path.

WORLD-BEAM® QS18LD Laser Diffuse Series Sensors

P/N 118899 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

3