1

Ordering information

To order an STM32WL3x Nucleo-64 board, refer to Table 1. For a detailed description, refer to the user manual on

the product web page. Additional information is available from the datasheet and reference manual of the target

microcontroller.

Table 1. List of available products

Order code

Board reference

User

manual

Target STM32

Differentiating feature

NUCLEO-WL33CC1

•

MB1801(1)

•

MB2029-Highband-Bxx(2)

UM3418

STM32WL33CCV6

Front end optimized for

826

‑958 MHz high band at

16 dBm

NUCLEO-WL33CC2

•

MB1801(1)

•

MB2029-Lowband-Bxx(2)

Front end optimized for

413

‑479 MHz low band at

16 dBm

1. Mezzanine board

2. MCU RF board. Bxx stands for BOM revision.

1.1

Product marking

The stickers located on the top or bottom side of all PCBs provide product information:

•

First sticker: product order code and product identification, generally placed on the main board featuring

the target device.

Example:

Product order code

Product identification

•

Second sticker: board reference with revision and serial number, available on each PCB.

Example:

MBxxxx-Variant-yzz

syywwxxxxx

On the first sticker, the first line provides the product order code, and the second line the product identification.

On the second sticker, the first line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board

reference, “Variant” (optional) identifies the mounting variant when several exist, “y” is the PCB revision, and “zz”

is the assembly revision, for example B01. The second line shows the board serial number used for traceability.

Products and parts labeled as “ES” or “E” are not yet qualified or feature devices that are not yet qualified.

STMicroelectronics disclaims any responsibility for consequences arising from their use. Under no circumstances

will STMicroelectronics be liable for the customer's use of these engineering samples. Before deciding to use

these engineering samples for qualification activities, contact STMicroelectronics' quality department.

“ES” or “E” marking examples of location:

•

On the targeted STM32 that is soldered on the board (for an illustration of STM32 marking, refer to the

STM32 datasheet Package information paragraph at the www.st.com website).

•

Next to the evaluation tool ordering part number that is stuck, or silk-screen printed on the board.

Some boards feature a specific STM32 device version, which allows the operation of any bundled commercial

stack/library available. This STM32 device shows a “U” marking option at the end of the standard part number

and is not available for sales.

To use the same commercial stack in their applications, the developers might need to purchase a part number

specific to this stack/library. The price of those part numbers includes the stack/library royalties.

NUCLEO-WL33CC1 NUCLEO-WL33CC2

Ordering information

DB5352 - Rev 2

page 2/6