PROLINE G2 ExtERNaL COmPONENts Door Accessories

nVent.com/HOFFMAN

SUBJECT TO CHANGE WITHOUT NOTICE

mOduLaR ENCLOsuRE sOLutIONs

5

Spec-01190 B

PROLINE GROuNdING KIt

The Grounding Kit allows a PROLINE

or PROLINE G2 enclosure to be

grounded to VDE specifications.

Includes six 12-gauge wires 411 mm

(16.19) long with ring terminations

and M6 mounting hardware.

Bulletin: p20

Catalog Number

Wire

Size

Length Between

Ring Terminals

mm/in.

Ring Terminal

Hole Diameter

mm/in.

PGK

12 ga.

411

16.19

7

.29

mECHaNICaL INtERLOCK

mechanical Interlock

The PROLINE and PROLINE G2 Mechanical Interlock can be

actuated by any PROLINE or PROLINE G2 solid or disconnect door in

a multiple-bay enclosure system. Up to ten doors, including window

doors, can be interlocked.

The interlock device engages the door at the center to provide

maximum security. The master door can be positioned in any

location. Only after the master door is opened can slave doors be

opened. The interlock system is modular and easy to assemble;

no drilling or layout work is required to install. Brackets, rods and

fasteners are heavy gauge steel. Meets interlocking requirements

established by General Motors, Ford and Chrysler.

Front-to-Back Interlock

The Front-to-Back Interlock is used to interlock the rear doors of

an enclosure in conjunction with a Master Door Actuator Kit and a

Slave Door Kit. When the Master Door Actuator Kit on the front of

the enclosure is activated (by a solid or disconnect master door) and

the Front-to-Back Kit linkage is in place, the pivot bracket is pulled,

which activates the Slave Door Kit to interlock the back doors of the

enclosure with the front doors.

Bulletin: p20

Catalog Number

Description

PMLMAK

Master Door Activator Kit

PMLSK

Door Slave Kit

PMLEK

Extension Kit

PMLFB

Front-to-Back Kit

For Catalog No. PMLMAK, order 1 for master door.

For Catalog No. PMLSK, order 1 for each slave door (wIll accommodate single door, window door and

overlapping door).

tHERmOPLastIC data POCKEt

aPPLICatION

Provides a convenient place to store wiring diagrams, operation

manuals and other documentation inside the enclosure.

sPECIFICatIONs

•

Adhesive-backed pockets mount inside the solid enclosure cover

•

Mounting hardware included

•

Thermoplastic pockets are dark gray and have cut-away areas

for easy inspection of contents

Bulletin: A80Dp

Catalog Number

Description

L

mm/in.

W

mm/in.

ADP1

Small Thermoplastic Data Pocket

152

6.0

152

6.0

ADP2

Large Thermoplastic Data Pocket

305

12.0

305

12.0