7

Carlo Gavazzi Ltd.

RGC2, RGC3

RGC2, RGC3 DS ENG

05/10/20

Features

Material

PA66 (UL94 V0), RAL7035

850°C, 750°C/2s according to GWIT and GWFI requirements of EN 60335-1

Mounting

DIN rail (RGC3..48: Panel mount)

Touch Protection

IP20

Overvoltage Category

III, 6 kV (1.2/50 μs) rated impulse withstand voltage

Isolation

Input and Output to Case: 4000 Vrms

Input to Output: 4000 Vrms (RGC..M: 2500 Vrms)

Weight

RGC..10: approx. 470 g

RGC2..25, RGC3..20 (M): approx. 600 g (680 g)

RGC2..40, RGC3..25, RGC3..30 (M): approx. 850 g (920 g)

RGC3..40: approx. 740 g

RGC3..48 (M): approx. 2400 g (2400 g)

RGC2..75, RGC3..65: approx. 980 g

General data

Performance

RGC2..22..25

RGC2..60..10

RGC2..60..25

RGC2..60..40

RGC2..60..75

Operational voltage range, Ue

42 - 242 VAC

42 - 660 VAC

90 - 660 VAC (RGC..M)

Permissable voltage unbalance

15% between L1/L2/L3

Blocking voltage

800 Vp

1200 Vp

Max. operational current per

pole1: AC-51 @ Ta=25°C

32 AAC

10 AAC

32 AAC

50 AAC

85 AAC

Max. operational current per

pole1: AC-51 @ Ta=40°C

27 AAC

10 AAC

27 AAC

40 AAC

75 AAC

Max. operational current per

pole1: AC-53a @ Ta=40°C

11.5 AAC

5 AAC

11.5 AAC

16.5 AAC

28 AAC

Operational frequency range

45 to 65 Hz

Output protection

Integrated varistor

Leakage current @ rated voltage

5 mAAC

Minimum operational current

RGC..F, RGC..M

250 mAAC

1.2 AAC

250 mAAC

-

250 mAAC

1.2 AAC

400 mAAC

1.2 AAC

500 mAAC

1.2 AAC

Repetitive overload current

(Motor rating) UL508: Ta=40°C,

t

ON=1 s, tOFF=9 s, 50 cycles

61 AAC

30 AAC

61 AAC

107 AAC

154 AAC

Non-repetitive surge current

(I

TSM), t=10 ms

600 Ap

600 Ap

600 Ap

1150 Ap

1750 Ap

I²t for fusing (t=10 ms), minimum

1800 A²s

1800 A²s

1800 A²s

6600 A²s

15000 A²s

No. of motor starts per hour2

(x: 6, Tx:6s, F:50%) @ 40°C

30

Power factor

>0.5 at rated voltage

Critical dV/dt (@Tj init = 40°C)

1000 V/μs

RGC2.. Output

1. Refer to Current Derating Curves. Max. VDE AC-51 rating for RGC2..10 is 9AAC

2. Overload profile for AC-53a;

Ie: AC-53a: xIe-Tx: F-S, where Ie = nominal current (AC-53a AAC), xIe = overload current (AAC), Tx = duration of overload current (s), F

= duty cycle (%), S = number of starts. Example; 5A: AC-53a: 30 - 6 : 50 - 10 = max. 10 starts for the RGC2..10 with an overload profile

of 30 A for 6 seconds with a duty cycle of 50%.