Basic Rating

 

kA

5

max. Fuse

 

A

110

High fault rating

 

kA

10

max. Fuse

 

A

50, Class J

Terminal capacity

 

 

 

Solid or flexible conductor with ferrule

 

AWG

14 - 8

Terminal screw

 

 

M4

Tightening torque

 

lb-in

14.1

Design verification as per IEC/EN 61439

Technical data for design verification

 

 

 

Rated operational current for specified heat dissipation

In

A

25

Heat dissipation per pole, current-dependent

Pvid

W

1.1

Equipment heat dissipation, current-dependent

Pvid

W

0

Static heat dissipation, non-current-dependent

Pvs

W

0

Heat dissipation capacity

Pdiss

W

0

Operating ambient temperature min.

 

°C

-25

Operating ambient temperature max.

 

°C

50

IEC/EN 61439 design verification

 

 

 

10.2 Strength of materials and parts

 

 

 

10.2.2 Corrosion resistance

 

 

Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures

 

 

Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat

 

 

Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat

and fire due to internal electric effects

 

 

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

 

 

UV resistance only in connection with protective shield.

10.2.5 Lifting

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions

 

 

Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

 

 

Meets the product standard's requirements.

10.5 Protection against electric shock

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

 

 

Is the panel builder's responsibility.

10.8 Connections for external conductors

 

 

Is the panel builder's responsibility.

10.9 Insulation properties

 

 

 

10.9.2 Power-frequency electric strength

 

 

Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage

 

 

Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material

 

 

Is the panel builder's responsibility.

10.10 Temperature rise

 

 

The panel builder is responsible for the temperature rise calculation. Eaton will

provide heat dissipation data for the devices.

10.11 Short-circuit rating

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.12 Electromagnetic compatibility

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.13 Mechanical function

 

 

The device meets the requirements, provided the information in the instruction

leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Switch disconnector (EC000216)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Switch disconnector (ecl@ss10.0.1-27-37-14-03

[AKF060013])

Version as main switch

 

 

Yes

Version as maintenance-/service switch

 

 

Yes

Version as safety switch

 

 

No

Version as emergency stop installation

 

 

No

Version as reversing switch

 

 

No

06/29/2020

Eaton 048365 ED2020 V69.0 EN

4 / 6