Features

n

Surface mount SMC package

n

Standoff voltage: 12 to 30 volts

n

Peak pulse power: 5000 watts

n

Typical temperature coefficient:

DVBR = 0.1 % x VBR @ 25 °C x DT

n

RoHS compliant* and halogen free**

Sustainability

n

Recyclable ESD-safe packaging

n

ISO 14001, low-impact energy

n

Responsibly sourced and produced

Applications

n

Portable communications

n

Computing and video equipment

5.0SMDJ-R SERIES

Transient Voltage Suppressor Diodes

*RoHS

COMPLIANT

&

**HAL

OGEN

FREE

www.bourns.com

TECHNICAL INVENTORY

SAMPLES

FOLLOW

CONTACT

LIBRARY

PRODUCT

SELECTOR

Portable communications, computing and video equipment manufacturers

are challenging the semiconductor industry to develop increasingly higher

power density circuit protection components.

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD

protection applications, in compact chip package DO-214AB (SMC)

size format. The Transient Voltage Suppressor series offers a choice of

Working Peak Reverse Voltage from 12 to 30 V and Breakdown Voltage

up to 36.8 V. Typical fast response times are less than 1.0 ps from

0 V to Breakdown Voltage.

Bourns® Chip Diodes conform to JEDEC standards, are easy to handle

with standard pick and place equipment and the flat configuration

minimizes roll away.

Product Overview

* RoHS Directive 2015/863, Mar 31, 2015 and Annex.

** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900

ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine

(Br) and Chlorine (Cl) content is 1500 ppm or less.

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers

as set forth on the last page of this document, and at www.bourns.com/docs/legal/

disclaimer.pdf.

Parameter

Symbol

Value

Unit

Peak Pulse Power Dissipation (TP = 1 ms) (Note 1)

PPPM

5000

Watts

Peak Pulse Current with a 10/1000 µs Waveform

IPPM

See Electrical

Characteristics

Chart

Amps

Peak Forward Surge Current (Note 2)

8.3 ms Single Half Sine Wave Superimposed on Rated Load

(JEDEC Method) (Note 3)

IFSM

300

Amps

Steady State Power Dissipation @ TL = 50 °C

PM(AV)

6.5

Watts

Maximum Instantaneous Forward Voltage @ IPP = 100 A (Note 2)

VF

5

Volts

Operating Temperature Range

TJ

-55 to +150

°C

Storage Temperature Range

TSTG

-55 to +150

°C

Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)

1.

Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.

2.

Forward surge current and forward voltage are only applicable to unidirectional models.

3.

8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute.

Contact Information

www.bourns.com

Phone

Email

Asia-Pacific

+886-2 2562-4117

asiacus@bourns.com

Europe

+36 88 885 877

eurocus@bourns.com

Mexico

+52 614 478 0400

mexicus@bourns.com

The Americas

+1-951 781-5500

americus@bourns.com

Agency Recognitiion

UL

File Number:

E153537