RESOLUTION

:

0.1

 to 1000, 1 ABOVE 1000

General

BATTERY

:

PP3 9V I.E.C. 6F22

BATTERY LIFE (INTERMITTENT USE)

:

GREATER THAN 200 HOURS (ALKALINE)

WEIGHT

:

155 gm

DIMENSIONS

:

130 X 70 X 33 mm

Probe

Description

This probe uses the straight handle for fine control. The probe is designed for the measurement

of both surface temperatures and Immersion temperatures.

NOTE: This probe only requires light pressure to give a true reading and is suitable for smooth,

clean surfaces.

If used on an uneven surface, there is a risk that the band will be weakened and

deformed.

Construction

Ribbon band sensor with thermocouple sensor attached and draught shield: Stainless Steel 316

(Food Grade) Sealed with Silicon Rubber compound to ensure the probe is fully waterproof.

1M straight polyurethane cable with moulded connector.

Features



TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY.

This results in a solid handle as opposed to a hollow handle. This is particularly important

as there is often damage to the handles caused by excess heat. With a hollow handle it is

possible to puncture the outer plastic and damage the sensor irreparably.



WATERPROOF HANDLE

Due to the total encapsulation method used, all TME probe handles are completely

waterproof.



TOUGH POLYURETHANE CABLE



Polyurethane cables are used in place of the standard PVC for the following reasons

:-



Non–Toxic



Greater mechanical strength for durability



12 X 0.2mm wires used internally for greater strength.



PTFE inner insulation for strength and retractability.



HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT

Type ‘K’ Thermocouple

: Class I

(±1.5°C ±0.25%)



POLYPROPYLENE HANDLES

Polypropylene is an extremely tough and durable material, commonly used for milk crates, it

has good low temperature performance and a relatively high melt temperature. It performs

exceptionally well under chemical attack.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 50 °C



TIME RESPONSE

(96% of value on clean metal)

: 3 Secs



MEASUREMENT RANGE

: -50 TO 250 °C (higher for

non-continuous measurement)