www.bkprecision.com

Handheld Digital Storage Oscilloscopes

2510 Series

5

Models

2511

2512

2515

2516

Performance Characteristics

Bandwidth

60 MHz

100 MHz

60 MHz

100 MHz

Real Time Sampling Rate

1 GSa/s (half-channel interleaved)(1), 500 MSa/s (per channel)

Channels

2 non-isolated

2 isolated

Rise Time

< 5.8 ns

< 3.5 ns

< 5.8 ns

< 3.5 ns

Ch-to-Ch Isolation (both

channels at same V/div setting)

> 100:1 at 50 MHz

Memory Depth

40 kpts (half-channel interleaved)(1)(2), 20 kpts (per channel)

Deep Memory(3)

2 Mpts (half-channel interleaved)(1), 1 Mpts (per channel)

Vertical Resolution

8 bits

Vertical Sensitivity

2 mV/div – 100 V/div (1-2-5 order)

5 mV/div – 100 V/div (1-2-5 order)

DC Gain Accuracy

5 mV/div-100 V/div:

≤ ± 4 %

Max. BNC Input Voltage

CATII 300 Vrms from BNC signal to BNC shell

Max. Input Voltage for Probe

PR150SA(4) : 1x/10x CAT II 300 V

PR250SA(5)(6): 10x CAT III 600 V, CATII 1000 V

Channel Voltage Offset Range

2 mV - 200 mV : ±1.6 V

206 mV - 10 V : ±40 V

10.2 V - 100 V : ±400 V

5 mV - 200 mV : ±1.6 V

206 mV - 10 V : ±40 V

10.2 V - 100 V : ±400 V

Bandwidth Limit

20 MHz (-3 dB)

Horizontal Scan Range

5.0 nS/div - 50 S/div

2.5 nS/div - 50 S/div

5.0 nS/div - 50 S/div

2.5 nS/div - 50 S/div

Timebase Accuracy

± 50 ppm measured over 1 ms interval

Input Coupling

AC, DC, GND

Input Impedance

1 M

Ω +/- 2 % || 18 pF ± 3 pF

1 M

Ω +/- 2 % || 16 pF ± 3 pF

Probe Attenuation Selectable Factors

1X, 5X, 10X, 50X, 100X, 500X, 1000X

Vertical and Horizontal Zoom

Vertically or horizontally expand or compress a live or stopped waveform

I/O Interface

USB

USB host port support USB flash drives (FAT format)

mini-USB device port for PC connectivity and probe compensation

Acquisition Modes

Sampling

Display sample data only

Peak Detect

Capture the maximum and minimum values of a signal

Average

Waveform averaged, selectable from 4, 16, 32, 64, 128, 256

Trigger System

Trigger Types

Edge, Pulse Width, Video*, Slope, Alternative

*Support signal formats: PAL/SECAM, NTSC

Trigger condition: odd field, even field, all lines, or line number

Trigger Modes

Auto, Normal, Single

Trigger Coupling

AC, DC, LF reject, HF reject

Trigger Source

CH1, CH2

Trigger Level Range

± 6 divisions from center of display

Trigger Displacement

Pre-trigger: Memory depth / 2* sampling

Delay Trigger: 268.04 div

Pulse Width Trigger

Positive slope (>, <, =), Negative slope (>, <, =), Time: 20 ns - 10 s

Slope Trigger

Positive slope (>, <, =), Negative slope (>, <, =), Time: 20 ns - 10 s

Alternate Trigger

CH1 trigger type: Edge, Pulse, Video, Slope

CH2 trigger type: Edge, Pulse, Video, Slope

Digital Storage Oscilloscope Specifications