Plastic tubing

PUN-H-10X1,5-SI

Part number: 558281

General operating condition

Data sheet

Feature

Value

Outside diameter

10 mm

Bending radius relevant for flow rate

52 mm

Inside diameter

7 mm

Min. bending radius

28 mm

Application note

TPE-U Ether based

Tubing characteristics

Suitable for energy chains

Operating pressure for entire temperature range

-0.095 MPa ... 0.6 MPa

Operating pressure for entire temperature range

-0.95 bar ... 6 bar

Operating pressure for entire temperature range

-13.775 psi ... 87 psi

Temperature-dependent operating pressure

-0.095 MPa ... 1 MPa

Temperature-dependent operating pressure

-0.95 bar ... 10 bar

Temperature-dependent operating pressure

-13.775 psi ... 145 psi

Information on operating pressure

Water: temperature-dependent operating pressure, see diagram, max.

0.3 MPa at 0 - 60 °C

Certification

German Technical Control Board (TÜV)

Certificate issuing authority

B 013277 0527 00

Operating medium

Compressed air as per ISO 8573-1:2010 [7:-:-]

Water (liquid, ice-free)

Material fire test

UL94 HB

LABS (PWIS) conformity

VDMA24364-B2-L

Suitability for the production of Li-ion batteries

Suitable for battery production with reduced Cu/Zn/Ni values (F1a)

Cleanroom suitability, measured according to ISO 14644-14

Statically installed element, no meaningful evaluation possible

according to ISO 14644-1

For use in the food industry

See supplementary material information

Ambient temperature

-35 °C ... 60 °C

Product weight by length

0.0465 kg/m

Pneumatic connection

For plug connection outside diameter 10 mm

Color

Silver

Shore hardness

D 52 +/-3

Note on materials

RoHS-compliant

Material of pneumatic tubing

TPE-U(PU)

2/23/26 - Subject to change - Festo SE & Co. KG

1/1