40 / 242 page
Start Up
Getting Started
22
WARNING
To avoid injury or death, unplug the line cord from the line voltage
power source before continuing.
1. Have handy a flat bladed screwdriver (Item 4).
2. Set the oscilloscope so its bottom is down on the work surface and its
rear is facing you.
3. Find the line cord on the rear cover. (See Figure 22.) Unplug the line
cord from its receptacle.
4. Find the fuse drawer beneath the line voltage plug on the rear panel.
Now, pry open the drawer with a small flat bladed screwdriver (Item 4),
and remove the line fuse. (See Figure 22.)
Fus
e
Power Connector
Fuse Drawer
Figure 22:Line Fuse Removal
5. Reinstallation: Doin reverse steps 6 through 3 toreinstall the line fuse
and then the line cord.
Line Fuse
Replacement
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
