LPC-COM-Board Data Sheet

5

4

Connecting the Board to the LPC-Stick

The LPC-COM-Board is connected to the LPC-Stick via an 80-pin PCB

connector. See the following schematics and figure:

For the connection of the LPC-Stick to the PC you can use the included USB

extension cable.

Caution

Connect the board and the stick only when not powered from the PC or

external and in the orientation as shown in the figure above.

Please avoid any short-cuts by metallic parts touching the LPC-Stick or the

LPC-COM-Board.

Do not supply external power to the LPC-COM-Board via the pads or the

USB-B connector while the stick is connected to the PC. This may cause

serious damage to your PC.

Modifications of the LPC-COM-Board or supplying of external power via the

LPC-COM-Board is at your own risk.

Hitex is not reliable for any damages caused by wrong handling.