KHA02 Air Probe

This probe is ideal for the temperature testing of heating and ventilation work.

Construction

Air probe with exposed thermocouple sensor protected by a perforated stainless steel sheath.

Insulated in ceramic sheaths.

Sensor stem is 4mm diameter and 110mm long, the sensor is approx 5mm from the stem end.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: –30 TO 50 °C



TIME RESPONSE

(96% of value in moving gas)

: 0.1 Secs



MEASUREMENT RANGE

: -100 TO 750 °C

Velcro Probe

Description

This probe uses a VELCRO strip to hold a temperature sensor against a pipe to measure the

temperature of the pipe.

Construction

The Velcro probe is fitted with a fine wire thermocouple mounted on a Velcro strip. The probe

is fitted with 1M of straight PTFE cable, complete with moulded miniature plug.

Sensor Features

 TOUGH PTFE CABLE

 HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT

Type ‘K’ Thermocouple

: Class I

(±1.5°C ±0.25%)

 WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 70 °C

 TIME RESPONSE (96% of value in water)

: 1.0 Secs

 MEASUREMENT RANGE

: -50 TO 150 °C

KH01 Handle

This handle is used in conjunction with the range of plug mounted probes offered by TME.

The socket in the end of the handle allows for the plug mounted probes to be inserted into the

handle. This means that a variety of temperature measurements may be performed using the

socket in the handle and different plug mounted probes.