1030 Technical Specifications

Voltage Ranges:

0 – 1V (1mV resolution)

0 – 100mV (100uV resolution)

0 – 10mV (10uV resolution)

0 – 8V (10mV resolution), using external precision 1Kohm resistor (included)

Current Ranges:

0 – 100mA (100uA resolution), 0 – 10mA (10uA resolution)

Accuracy:

Voltage:

10mV: 0.2% of full scale

100mV: 0.1% of full scale

1V: 0.1% of full scale

8V: 0.3% of full scale (using 1Kohm resistor & current o/p)

Current:

10mA: 0.2% of full scale

100mA: 0.2% of full scale

Linearity:

0.15%

Temperature Coefficient:

150ppm per °C

Noise:

30ppm of full scale (1V range)

Battery:

PP3 size, 9V. Approx 60 hours life. An optional alternative power source is a

NiCad or Ni-Mh rechargeable cell of the same type. This can be recharged

via the socket on the top of the unit without removing the cell from the unit.

Battery Condition:

Monitored by front panel indicator.

Output Polarity:

Positive or negative, switch selected. A centre ‘off ‘ position is also provided.

Maximum o/p Current:

1V, 100mV ranges: 20mA, 10mV, 8V ranges: Limited by output resistance.

Maximum o/p Voltage:

8V (current ranges)

Output Resistance:

0.2ohms on 1V and 100mV range

10ohms on 10mV range, 1Kohm on 8V range

Maximum Overload:

The 1030 can withstand continuous open circuit or short circuit on all ranges.

General Specification

Dimensions:

115mm x 62mm x 55mm. Complete with zip pouch carrying case

Weight:

0.5kg

Optional Extras:

Rechargeable Battery Pack: A mains re-charger and NiCad rechargeable

battery are available. The battery can be recharged without being removed.

Calibration Certificate traceable to NPL

UKAS Calibration Certificate

Ordering Information

Code

Description

1030

MicroCal (Combined Voltage and Current Source)

1031

Rechargeable Battery Pack (NiCad Battery and 240V Mains Charger)

1032

Rechargeable Battery Pack (NiCad Battery and 110V Mains Charger)

9155

Factory (NPL Traceable) Calibration Certificate

9110

UKAS Calibration Certificate (ISO 17025)

Due to continuous development Time Electronics reserves the right to change specifications without prior notice.

Time Electronics, Botany Industrial Est. Tonbridge, Kent. England. TN9 1RH.

Tel: +44 (0)1732 355993 Fax: +44 (0)1732 770312 E-mail: mail@timeelectronics.co.uk

www.timeelectronics.com

V1b 20/06/08