AP8G15NF

150V N+P-Channel Enhancement Mode MOSFET

AP8G15NF REV1.0

永源微電子科技有限公司

Attention

1,Any and all APM Microelectronics products described or contained herein do not have specifications

that can handle applications that require extremely high levels of reliability, such as life support systems,

aircraft's control systems, or other applications whose failure can be reasonably expected to result in

serious physical and/or material damage. Consult with your APM Microelectronics representative nearest

you before using any APM Microelectronics products described or contained herein in such applications.

2,APM Microelectronics assumes no responsibility for equipment failures that result from using products

at values that exceed, even momentarily, rated values (such as maximum ratings, operatingcondition

ranges, or other parameters) listed in products specifications of any and all APM Microelectronics

products described or contained herein.

3, Specifications of any and all APM Microelectronics products described or contained here instipulate the

performance, characteristics, and functions of the described products in the independent state, and are

not guarantees of the performance, characteristics, and functions of thedescribed products as mounted

in the customer

’s products or equipment. To verify symptoms andstates that cannot be evaluated in an

independent device, the customer should always evaluate and test devices mounted in the customer

’s

products or equipment.

4, APM Microelectronics Semiconductor CO., LTD. strives to supply high quality high reliabilityproducts.

However, any and all semiconductor products fail with some probability. It is possible that these

probabilistic failures could give rise to accidents or events that could endanger human lives that could

give rise to smoke or fire, or that could cause damage to other property. Whendesigning equipment,

adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include

but are not limited to protective circuits and error prevention circuits for safe design, redundant

design,and structural design.

5,In the event that any or all APM Microelectronics products(including technical data, services) described

or contained herein are controlled under any of applicable local export control laws and regulations, such

products must not be exported without obtaining the export license from the authorities concerned in

accordance with the above law.

6, No part of this publication may be reproduced or transmitted in any form or by any means,electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system, or

otherwise, without the prior written permission of APM Microelectronics Semiconductor CO., LTD.

7, Information (including circuit diagrams and circuit parameters) herein is for example only; it is not

guaranteed for volume production. APM Microelectronics believes information herein is accurate and

reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual

property rights or other rights of third parties.

8, Any and all information described or contained herein are subject to change without notice due to

product/technology improvement,etc. When designing equipment, refer to the "DeliverySpecification" for

the APM Microelectronics product that you Intend to use.