MMU 0102, MMA 0204, MMB 0207 - Professional

www.vishay.com

Vishay Beyschlag

Revision: 20-Jan-2026

12

Document Number: 28713

For technical questions, contact: melf@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS

Note

• Color code marking is applied according to IEC 60062 (1) in four bands (E24 series) or five bands (E96 or E192 series). Each color band

appears as a single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last color band for

tolerance is approximately 50 % wider than the other bands. An interrupted yellow band between the 4th and 5th full band indicates TC25

SOLDER PAD DIMENSIONS AND RECOMMENDED SOLDERING PROFILES

For recommended solder pad dimensions please refer to the Vishay Draloric / Beyschlag Surface-Mount Resistors and Fuses

Mounting Guide at www.vishay.com/doc?28950.

For recommended soldering profiles please refer to www.vishay.com/doc?31090.

DIMENSIONS AND MASS

TYPE/SIZE

L

(mm)

D

(mm)

L1 min.

(mm)

D1

(mm)

K

(mm)

MASS

(mg)

MMU 0102

2.2 + 0 / - 0.1

1.1 + 0 / - 0.1

1.2

D + 0 / - 0.1

0.4 + 0.1 / - 0.05

8

MMA 0204

3.6 + 0 / - 0.2

1.4 + 0 / - 0.1

1.8

D + 0 / - 0.15

0.75 ± 0.1

22

MMB 0207

5.8 + 0 / - 0.15

2.2 + 0 / - 0.2

3.2

D + 0 / - 0.2

1.15 ± 0.1

80

REVISION HISTORY

REVISION DATE

DESCRIPTION

20-Jan-2026

Page 1:

- Introduction of feature PFAS free

- Addition of thermal resistance information

Page 5:

- Introduction of higher pulse robustness for single pulse for

R < 10 Ω

Page 6:

- Introduction of higher pulse robustness for continuous pulse for

R < 10 Ω

Page 12

- Introduction of “Revision History” table

L

1

K

D

1

D

L