Electrical characteristics

LM2903H

4/9

3

Electrical characteristics

Table 3.

CC

Symbol

Parameter

Min.

Typ.

Max.

Unit

17

15

mV

Input offset current

550

150

nA

25

250

400

nA

25

200

V/mV

Supply current (all comparators)

0.4

1

1

2.5

mA

+

V

250

400

800

mV

0.1

1

nA

µA

6

2

16

mA

µs

Output signal at 50% of final value

Output signal at 95% of final value

500

1

ns

µs

1.

2.

The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant,

independent of the state of the output, so there is no load charge on the reference of input lines.

3.

Positive excursions of input voltage may exceed the power supply level. As long as the other voltage remains within the

common-mode range, the comparator will provide a proper output state.

The low input voltage state must not be less than –0.3 V (or 0.3 V below the negative power supply, if used)

4.

The response time specified is for a 100 mV input step with 5 mV overdrive.

5.

Maximum values are guaranteed by design and evaluation.