0.0

0.1

0.2

0.2

0.1

0.0

0.5

1.0

2.1

2.1

1.0

0.5

0.1

0.3

0.7

0.7

0.3

0.1

1.0

3.2

7.5

7.5

3.2

1.0

0.2

0.7

3.2

3.2

0.7

0.2

2.1

7.5

34.4

34.4

7.5

2.1

0.2

0.7

3.2

3.2

0.7

0.2

2.1

7.5

34.4

34.4

7.5

2.1

0.1

0.3

0.7

0.7

0.3

0.1

1.0

3.2

7.5

7.5

3.2

1.0

0.0

0.1

0.2

0.2

0.1

0.0

0.5

1.0

2.1

2.1

1.0

0.5

candle power distribution

DLE L-101 — 6”

photometric performance

source specifications

0

90

57

75

19

-90

38

End View (solid line) and side view (dashed line) (Candelas)

120º

End view

Side view

120º

Optics:

Clear polycarbonate

Source:

24 surface mount LEDs (8 Red, 8 Green, 8 Blue)

Beam Angle:

120° x 120° (at 50% of peak illuminance)

Distribution:

Symmetric direct illumination

CCT:

Adjustable 1,000–10,000K

CRI:

Not measurable (CIE 13.3-1995)

Measured on:

White (Full Red, Green, and Blue)

Beam center:

75 cd

Thin dashed lined:

Indicates 50% of peak

Multipliers:

0.33 Red, 0.29 Green, 0.38 Blue

The photometric data below is based on the following constraints: DLE L-101 mounted into a 6-inch, linear tube fixture with clear lens. For more

information, refer to the iColor Cove NXT-12.IES file located on www.colorkinetics.com/support.

Photometric data is based on test results from an independent testing lab.

optiBin®

There are inherent variations in the fabrication processes of all semiconductor materials. For LEDs, this variance results in differences in the color and intensity of

light output as well as electrical characteristics. Due to these differences, LED manufacturers sort production into “bins,” but insuring the availability of a single bin

is very difficult. To minimize this issue and achieve optimal color consistency in its products, Color Kinetics has developed and uses a proprietary technology called

Optibin. Optibin is an advanced production binning optimization process that minimizes the effects of LED variance for the best possible output uniformity in the

final product. Color Kinetics Optibin technology gives the most consistent control of color and intensity from product to product.

iLLUMinancE

iLLUMinancE DistRiBUtion

Units:

Footcandles (top)/Lux (bottom)

Measured on:

White (Full Red, Green, and Blue)

Distance from surface: 1’/.3m (from center of grid)

Multipliers:

0.33 Red, 0.29 Green, 0.38 Blue

1.5’/0.5m

1.5’/0.5m

1.5’/0.5m

1.5’/0.5m

0’/0m

0’/0m

Measured in Footcandles (top)/Lux (bottom) on axis.

3’

6’

9’

15’

1m

2m

3m

5m

8.9

2.2

1.0

0.3

95.8

23.7

10.8

3.2

2.9

0.7

0.3

0.1

31.2

7.5

3.2

1.1

2.5

0.6

0.3

0.1

26.9

6.5

3.2

1.1

3.4

0.8

0.4

0.1

36.6

8.6

4.3

1.1

color

white

red

green

blue

typicaL Light oUtpUt

color

wave length

power

efficacy

(nm)

white

na

23.9

3.6

6.6

red

610-635

7.8

0.9

8.6

green

515-535

6.9

1.6

4.3

blue

460-480

9.1

1.6

5.6

Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA

Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • info@colorkinetics.com • www.colorkinetics.com