www.cd4power.com

NPH15S SERIES

Isolated 15W Single Output DC/DC Converters

C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing

process at any time, without notice. Please check with your supplier or visit our website to ensure that you have the current

and complete specification for your product before use.

© C&D Technologies (NCL) Limited 2005 KDC_NPH15SC.6

No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including,

but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D

Technologies (NCL) Limited. Instructions for use are available from www.cd4power.com

C&D Technologies (NCL) Ltd

Tanners Drive, Blakelands North

Milton Keynes, MK14 5BU, UK

Tel: +44 (0)1908 615232

Fax: +44 (0)1908 617545

email: MK@cdtechno.com

C&D Technologies, Inc.

11 Cabot Boulevard, Mansfield

MA 02048-1151, USA

Tel: +1 (508) 339-3000

Fax: +1 (800) 233-2765

email: sales@cdtechno.com

PACKAGE SPECIFICATIONS

MECHANICAL DIMENSIONS

TUBE OUTLINE DIMENSIONS

RECOMMENDED FOOTPRINT

Weight: 36g

All dimensions in inches ±0.01 (mm ±0.25mm)

All pins on a 0.10 (2.54) pitch and within ±0.01 (2.54) of true position

board on which the converter is mounted. Top side tracks must not contact the edge of the case or the ferrite

core, visible on the underside of the unit.

All dimensions in inches ±0.01 (mm ±0.25mm)

Tube length: 530 (20.866) ±2 (0.079)

Tube material: Antistatic coated clear PVC

Tube Quantity: 15

All dimensions in inches ±0.01 (mm ±0.25mm)

RoHS COMPLIANCE INFORMATION

This series is compatible with RoHS soldering

systems with a peak wave solder temperature of

300ºC for 10 seconds. The pin termination finish

on this product series is Matte Tin over Nickel

Preplate. The series is backward compatible

with Sn/Pb soldering systems.

For further information, please visit www.cd4power.com/rohs