2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Ventilator which is designed for indoor

use in an industrial environment.

Read this manual carefully, in doing so you guarantee the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

SAFETY WARNINGS

Make sure that you read, understand and comply with the following warnings.

POSITIONING

Be aware that the suction capability is considerable. Do not position the

ventilator where it will blow dust or hazardous fumes at people.

DO NOT place the ventilator close to any wet surface. DO NOT place against

any surface such as a wall, door or furniture etc.

DO NOT place the ventilator on a raised surface or anywhere it could topple

over.

Only use the ventilator in a level position.

Ensure that the intake grille cannot be blocked by curtains or other fabrics. Do

not allow loose clothing, long hair, jewellery etc. to be drawn into the intake

side of the fan.

DO NOT operate the ventilator in explosive atmospheres such as in the

presence of flammable liquids, gases or dust such as in a paint spray booth.

Electric motors create sparks which may ignite dust or fumes.

DO NOT cover the fan or obstruct the air inlet and outlet sections of the

ventilator.

DO NOT get the ventilator wet or use in areas of high condensation.

DO NOT allow the power cable to touch hot surfaces.

DO NOT operate without the safety grills secured in position.

PERSONNEL SAFETY

DO NOT use the ventilator when you are tired or under the influence of

alcohol, drugs or intoxicating medication.

DO NOT stand on the ventilator.