9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DISPLAY & CONTROL PANEL

DISPLAY BUTTON

Press the DISPLAY button until the following LED is lit:

1. VOLTAGE (V) - When the charger is NOT charging a battery, the digital

display will show the battery voltage.

2. BATTERY (%) - When in charging, the digital display shows an estimated

charge percentage of the battery connected to the charger s battery

clamps.

3. ALTERNATOR (%) - The digital display shows an estimated output

percentage of the vehicle’s charging system connected to the chargers’s

battery clamps, compared to a properly functioning system.

BATTERY TYPE, RATE SELECTION & FUNCTION BUTTONS

1. Press the BATTERY TYPE button to choose the type of battery to be charged:

STD, GEL or AGM

2. Press the RATE SELECTION button to choose the charging current required:

10A, 20A, 35A or 50A.

3. Then press the FUNCTION button until the CHARGING LED is lit (digital

display will show CHARGE-ON).

When in charging mode, pressing the BATTERY TYPE button will not work. To stop

charging, press FUNCTION button again and CHARGING LED will turn off (digital

display will show CHARGE-OFF)