| 数据搜索系统,热门电子元器件搜索 |
|
USB2512 数据表(PDF) 21 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
USB2512 数据表(HTML) 21 Page - SMSC Corporation |
|
21 / 37 page ![]() USB 2.0 High-Speed 2-Port Hub Controller Datasheet SMSC USB2512 21 Revision 1.92 (11-28-07) DATASHEET 4.2.1.17 Register 10h: Power-On Time 4.2.1.18 Register F6h: Boost_Up 4.2.1.19 Register F8h: Boost_2:0 BIT NUMBER BIT NAME DESCRIPTION 7:0 POWER_ON_TIME Power On Time: The length of time that it takes (in 2 ms intervals) from the time the host initiated power-on sequence begins on a port until power is good on that port. BIT NUMBER BIT NAME DESCRIPTION 7:2 Reserved Reserved 1:0 BOOST_IOUT USB electrical signaling drive strength Boost Bit for the Upstream Port. ‘00’ = Normal electrical drive strength = No boost ‘01’ = Elevated electrical drive strength = Low (approximately 4% boost) ‘10’ = Elevated electrical drive strength = Medium (approximately 8% boost) ‘11’ = Elevated electrical drive strength = High (approximately 12% boost) Note: “Boost” could result in non-USB Compliant parameters (one example would be Test J/K levels), the OEM should use a 00 value unless specific implementation issues require additional signal boosting to correct for degraded USB signalling levels. BIT NUMBER BIT NAME DESCRIPTION 7:4 Reserved Reserved 3:2 BOOST_IOUT_2 USB electrical signaling drive strength Boost Bit for Downstream Port ‘2’. ‘00’ = Normal electrical drive strength = No boost ‘01’ = Elevated electrical drive strength = Low (approximately 4% boost) ‘10’ = Elevated electrical drive strength = Medium (approximately 8% boost) ‘11’ = Elevated electrical drive strength = High (approximately 12% boost) Note: “Boost” could result in non-USB Compliant parameters (one example would be Test J/K levels), the OEM should use a 00 value unless specific implementation issues require additional signal boosting to correct for degraded USB signalling levels. 1:0 BOOST_IOUT_1 USB electrical signaling drive strength Boost Bit for Downstream Port ‘1’. ‘00’ = Normal electrical drive strength = No boost ‘01’ = Elevated electrical drive strength = Low (approximately 4% boost) ‘10’ = Elevated electrical drive strength = Medium (approximately 8% boost) ‘11’ = Elevated electrical drive strength = High (approximately 12% boost) Note: “Boost” could result in non-USB Compliant parameters (one example would be Test J/K levels), the OEM should use a 00 value unless specific implementation issues require additional signal boosting to correct for degraded USB signalling levels. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |