Time Electronics

5011 Resistance and Temperature Calibrator

Time Electronics Ltd, Unit 5, TON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom

T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com

v2c

06/22

Technical Specifications

Standard features

Resistance

Range

Accuracy

Resolution

1 Ω to 20 Ω

0.01 % ± 10 mΩ

1 Ω

20 Ω to 99.999 Ω

0.01 % ± 10 mΩ

1 mΩ / 5 mΩ*

100 Ω to 999.999 Ω

0.01 % ± 8 mΩ

1 mΩ

1 kΩ to 9.999 kΩ

0.02 % ± 23 mΩ

1 Ω

10 kΩ to 99.999 kΩ

0.01 % ± 1 Ω

1 Ω

100 kΩ to 999.99 kΩ

0.01 % ± 10 Ω

10 Ω

1 MΩ to 9.9999 MΩ

0.02 % ± 100 Ω

100 Ω

10 MΩ to 120 MΩ

0.1 % ± 1 kΩ

1 kΩ

Temperature coefficient ..................................................less than 50 ppm/°C

Power rating......................................................................... 0.1 W per resistor

Maximum voltage ....................................................................................250 V

Resistance switch Time ....................................................................... 250 μs

Operation time..................................................................................... 300 ms

* Output setting resolution below 50 Ω is 5 mΩ

PRT Simulation

RTD Type

Alpha coeff

Range

Accuracy

Pt100

0.003850

-180 to -100 °C

0.1 °C

Pt100

0.003850

-100 to 850 °C

0.05 °C

It should be noted that the accuracy of the PRT simulation is determined by the

accuracy of the PRT tables (BS EN 60751) published by the British Standards

Institute. The 5011 uses precise digital interpretation of the tables to output

resistance values that are within the accuracies specified in the table.

General Specifications

Warm up ................................................................30 minutes to full accuracy.

Settling time ................................................................... Less than 5 seconds.

Standard interfaces.......................................GPIB (IEEE-488), RS-232, USB.

Temperature performance............................................Operating: 0 to 40 °C.

........................................................................................Full Spec: 23 °C ± °C.

................................................................................... Storage: –10 °C to 50 °C.

Operating humidity/Altitude ................................... < 80 % non-condensing.

.............................................................................Operating altitude: 0 to 3 km.

....................................................................Non operating altitude: 3 to 12 km.

Line power.............................................................. 100 to 230 V AC 50/60 Hz.

.......................................... Power Consumption 60 W typical, 80 W maximum.

Dimensions ................................. W 450 x D 272 x H 152 mm (18 x 11 x 7 ”).

Weight........................................................................................7 kg (15.4 lbs).

Supplied with ..................... User manual, RS-232 cable, USB adaptor/cable.

(Accuracies quoted are for 1 year at 22 ºC ± 3 ºC)

Options

Thermocouple simulation

Type

Range °C

Accuracy °C

J

-210 to -50 / -50 to 1200

0.15 / 0.2

K

-200 to -100 / -100 to 1372

0.25 / 0.18

T

-200 to 100 / 100 to 400

0.2 / 0.15

R

-50 to 50 / 50 to 250 / 250 to 1768

1 / 0.7 / 0.6

S

-50 to 500 / 500 to 1768

0.9 / 0.6

B

300 to 800 / 800 to 1820

1.5 / 0.8

N

-200 to 0 / 0 to 600 / 600 to 1300

0.4 / 0.15 / 0.2

E

-200 to 0 / 0 to 1000

0.2 / 0.12

Cold Junction Compensation ± 0.5 °C (applies to ambient changes of less than

± 1 °C at 23 °C). The accuracy of the thermocouple simulation is determined by

the accuracy of the 5011’s DC voltage function and the accuracy of the standard

thermocouple tables (BS EN 60584-1) published by the British Standards Institute.

The 5011 uses precise digital interpretation of the tables to output voltage levels

that are within the accuracies specified in the table.

DC Voltage* (9711)

Range

Accuracy

Resolution

0 to 20 mV

40 ppm + 4 μV

0.1 μV

20 to 200 mV

40 ppm + 4 μV

1 μV

0.2 to 2 V

40 ppm + 15 μV

1 μV

2 to 20 V

40 ppm + 75 μV

10 μV

DC Current* (9718, requires 9711 option). Compliance Voltage: 10 V

Range

Accuracy

Resolution

0 to 200 μA

150 ppm + 25 nA

0.1 nA

0.2 to 2 mA

120 ppm + 55 nA

1 nA

2 to 20 mA

120 ppm + 200 nA

10 nA

20 to 200 mA

120 ppm + 2 μA

100 nA

* Specifications apply from 10 to 100 % of range. 10 % over range.

Digital frequency / period (9729)

2 V pk/pk approx 0.1 Hz to 10 MHz / 100 ns to 10 s. Accuracy 20 ppm.

Ordering information

5011..............................................Resistance and Temperature Calibrator

9711.................................... Internal DC voltage and thermocouple simulation

9718........................................................ Internal current option (220 mA max)

9729.................................................Internal frequency option (10 MHz digital)

9728..................................................................... 19 ” Universal rack mount kit

9541......................................................................................Basic test lead set

9796................................................................................ Premium test lead set

C171.................................................Traceable calibration certificate (Factory)

C115.......................................... Accredited calibration certificate (ISO 17025)

9795......................................................................... Printer and connectivity kit

ECFLA ...................................EasyCal Software (see separate datasheet for options)

Due to continuous development Time Electronics reserves the right to change specifications without prior notice.