Time Electronics

5025C Series 2 Multifunction Calibrator

Time Electronics Ltd, Unit 5, TON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom

T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com

Technical Specifications (for full technical data see extended specifications sheet)

Function

Range / Values

Best 1 year Specification

Voltage DC

0 to ± 1050 V

± 15 ppm of setting

Current DC

0 to ± 22 A

1100 A with clamp meter adaptor (option 9780)

± 60 ppm of setting

Voltage AC

2 mV to 1050 V / 20 Hz to 1 MHz sine-wave

± 0.05 % of setting

Current AC

10 μA to 22 A / 20 Hz to 5 kHz sine-wave

100 A with current transformer (option 9790)

1100 A with clamp meter adaptor (option 9780)

± 0.05 % of setting

Digital frequency

0.1 Hz to 10 MHz

± 20 ppm of setting

Digital period

100 ns to 10 s (fixed values 1, 2, 5 sequence)

± 20 ppm of setting

Conductance

100 mS to 1 nS (decade values)

± 100 ppm of setting

2-wire variable resistance

1 Ω to 1.1 GΩ

± 100 ppm of setting

4-wire decade resistance

1 Ω to 100 kΩ

± 30 ppm of setting

RTD simulation

–180 to 850 °C. Type Pt100, Pt200, Pt500, Pt1000

± 0.03 °C

Thermocouple simulation

–210 to 2315 °C. Type J, K, R, T, S, B, E, N, C, L, U

± 0.05 °C

Capacitance

1nF, 10nF, 20nF, 50nF, 100nF, 200nF, 500nF, 1μF, 10μF, 20μF, 50μF, 100μF

± 0.2 % of setting

Inductance

1mH, 1.9mH, 5mH, 10mH, 19mH, 50mH, 100mH, 190mH, 500mH, 1H, 10H

± 0.1 % of setting

Power

22 A, 1050 V, 23 kW, 40 to 500 Hz

ACV: 0.05 %, DCV: 0.01 %. ACI: 0.1%, DCI: 0.05 %

Phase / Power factor

± 90° / 0.00 to 1.00 PF

± 0.25°

Option 9780: Clamp meter adaptor

AC/DC Current up to 1100 A (DC, 45 to 90 Hz)

± 0.5 %

Oscilloscope Calibration (5025C-S2/SCP)

Amplitude

2 mV to 200 V (1 M Ω) and 1 mV to 2 V 50 Ω (Square-wave or DC)

± 0.05 %

Frequency

(fixed values 1, 2, 5 sequence)

0.1 Hz to 10 MHz

20 MHz, 50 MHz, 100 MHz

± 0.1 ppm

± 20 ppm

Period

(fixed values 1, 2, 5 sequence)

10 s to 100 ns

50 ns, 20 ns, 10 ns

± 0.1 ppm

± 20 ppm

Duty cycle

3 frequencies: 100 Hz, 1 kHz, 10 kHz, settable from 0 to 100 %

–

Fast-rise

< 400 ps. Bandwidth checking up to 400 MHz

–

Levelled sine wave

50 to 1000 kHz & 10 MHz to 2.2 GHz levelled sine-wave (0.35 to 3.5 V pk-pk)

Amplitude ± 0.5 %, Frequency ± 50 ppm

External Options

External Adaptors/Instruments

9780: Clamp meter adaptor (1 and 50 turn coil) • 9773: Optical tacho adaptor • 9790: 100 Amp AC current transformer

9760: Power amplifier (60 V AC, 90 V DC, 100 mA) • 9762: Rubidium high stability frequency reference

9764: Current probe calibration adaptor • 9766: Low noise attenuator (1000:1) • 9767: Low noise attenuator (100:1)

Accessories

9085: Soft carry case • 9059: Hard transit case • 9728: 19 " Universal rack mount kit

EasyCal Software

ECFLA: EasyCal full license • 9777: Bar code reader • 9779: Job and address label printer

EC2FL/EC2WL: Additional user licenses • EAD: EasyAdmin add-on • EWC: WebCerts • CREP: Crystal Reports software

General Specifications

Mains voltage.......................................100 to 260 V AC 50/60 Hz.

Fuse ratings .........................................3.15 A anti-surge.

Power consumption ............................120 W typical, 200 W maximum.

Temperature performance..................Operating: 10 to 40 °C. Storage: –10 to 50 °C.

Operating humidity..............................< 80 % non condensing.

Altitude .................................................0 to 3 km. Non operating: 3 to 12 km.

Warm up ...............................................30 minutes to full accuracy.

Interfaces..............................................RS-232, GPIB and USB (via RS-232 adaptor). Command set: Standard SCPI.

Dimensions / Weight ...........................W 447 x H 152 x D 470 mm. Weight: 16.5 kg.

Supplied accessories..........................Premium test lead set (S2PTL), calibrator control software (1 year license), RS-232 cable, RS-232 to USB adaptor, user manual.

Due to continuous development Time Electronics reserves the right to change specifications without prior notice.