LM2904W

Absolute maximum ratings and operating conditions

3/19

2

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

+32

V

V

Input voltage

V

Infinite

s

50

mA

Storage temperature range

-65 to +150

°C

Maximum junction temperature

150

°C

SO-8

TSSOP8

DIP8

125

120

85

°C/W

Thermal resistance junction to case(5)

SO-8

TSSOP8

DIP8

40

37

41

°C/W

Storage temperature range

-65 to +150

°C

ESD

2000

200

1500

V

1.

All voltage values, except differential voltage are with respect to network ground terminal.

2.

Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

3.

circuits on all amplifiers.

4.

This input current only exists when the voltage at any of the input leads is driven negative. It is due to the collector-base

junction of the input PNP transistor becoming forward biased and thereby acting as input diode clamps. In addition to this

diode action, there is also NPN parasitic action on the IC chip. This transistor action can cause the output voltages of the

negative. This is not destructive and normal output is restored for input voltages above -0.3 V.

5.

6.

Human body model: 100 pF discharged through a 1.5 k

Ω resistor between two pins of the device, done for all couples of pin

combinations with other pins floating.

7.

Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device

with no external series resistor (internal resistor < 5

Ω), done for all couples of pin combinations with other pins floating.

8.

Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to

the ground.

Table 2.

Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

3 to 30

V

Common mode input voltage range

V

Operating free-air temperature range

-40 to +125

°C