STULPI01ATBR datasheet(1/6 Pages) STMICROELECTRONICS

部件名	STULPI01ATBR

功能描述	HS USB ULPI transceiver

PDF	6 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

1 / 6 page

Data Brief

For further information contact your local STMicroelectronics sales office.

August 2007

Rev. 1

1/6

6

STULPI01A

STULPI01B

HS USB ULPI transceiver

Features

■ Fully compliant with:

Universal Serial Bus Specification Revision

2.0, On-The-Go Supplement to the USB 2.0

Spec. Rev. 1.0a, UTMI+ Low Pin Interface

transceiver specification 1.1

■ Fully compliant with ULPI 1.1 register set

■ Supports high-speed (480 Mbit/s), full-speed

(12 Mbit/s) and low-speed (1.5 Mbit/s) modes

of operation

■ Integrated HS termination and FS/LS/OTG

pull-up/ pull-down resistors

■ Supports both single (SDR) and Dual-edge

data rate (DDR) on ULPI interface

■ Supports Session Request Protocol (SRP) and

Host Negotiation Protocol (HNP) for dual-role-

device features

■ Ability to control ext. charge pump for higher

VBUS currents

■ External square wave clock with 1V8VIO

amplitude must be applied to oscillator input XI

■ On request 19.2 MHz or 26 MHz oscillator

frequency, external crystal version, can be

provided

■ Supports 2.7 V UART mode

■ Single supply, +3 V to +4.5 V voltage range

■ Integrated dual voltage regulator to supply

internal circuits with stable 3.3 V and 1.2 V

■ Integrated over current detector

■ Integrated USB2.0 §7.1.1 "Short Circuit

Withstand" protection

■ Power down mode with very low power

consumption for battery-powered devices

■ -40°C to 85°C operating temperature range

■ Available in µTFBGA36 RoHS package

Applications

■ Mobile phones

■ PDAs

■ MP3 players

■ Digital still cameras

■ Video camera

■ Printer

■ Navigation system

■ Set top box

Description

The STULPI01 is a high-speed ULPI (UTMI+ Low

Pin Interface), USB OTG transceiver which

provides complete physical layer solution for any

high speed USB host, device or OTG dual role

core. It allows USB ASICs to interface with the

physical layer of the USB through 12-pin or 8-pin

interface. It contains VBUS comparators, ID line

detector, complete ULPI register map and

interrupt generator, and the USB differential driver

and receivers. The STULPI01 transceiver is

suitable for mobile applications and battery

powered devices thanks to its low power

consumption and power down operating mode.

µTFBGA36

Lead-free Package

www.st.com

类似零件编号 - STULPI01ATBR

制造商	部件名	数据表	功能描述
STMicroelectronics	STULPI01ATBR	606Kb / 44P	High speed USB On-The-Go ULPI transceiver 20-Jun-2008

More results

类似说明 - STULPI01ATBR

制造商	部件名	数据表	功能描述
NXP Semiconductors	ISP1505C	393Kb / 76P	ULPI Hi-Speed USB host and peripheral transceiver Rev. 03-26 August 2008
	ISP1506A	427Kb / 80P	ULPI Hi-Speed USB OTG transceiver Rev. 02-28 August 2008
	ISP1512A	285Kb / 56P	ULPI Hi-Speed USB transceiver Rev. 01-31 July 2008
Cypress Semiconductor	CY7C68003	160Kb / 5P	MoBL-USB TX2UL USB 2.0 ULPI Transceiver
Cypress Semiconductor	CY7C68003	652Kb / 27P	MoBL-USB??TX2UL USB 2.0 ULPI Transceiver
STMicroelectronics	STULPI01A	1Mb / 44P	High-speed USB On-The-Go ULPI transceiver 07-Jun-2012
Cypress Semiconductor	CY7C68003	673Kb / 30P	MoBL-USB??TX2UL USB 2.0 ULPI Transceiver
List of Unclassifed Man...	ISP1507A	1Mb / 81P	ULPI Hi-Speed USB On-The-Go transceiver
Microchip Technology	USB3370	1Mb / 75P	Enhanced Single Supply Hi-Speed USB ULPI Transceiver 01/27/15
Microchip Technology	USB334X	1Mb / 92P	Enhanced Single Supply Hi-Speed USB ULPI Transceiver 10/25/17