LP35 LPG Gas Hose

www.

.com

V04.21

Application:

LP gas/propane bulk loading/unloading, input transfer, transport, agriculture, construction,

industrial, and commercial and reserved heating. Meets or exceeds the requirements of CAN/

CGA-8.1-M86 Type I; UL21.

Construction:

Tube - Black nitrile Z\v” - 1Z\v”. Black neoprene 1Z\x” - 3”

Reinforcement - Multiple textile plies for kink resistance, strength and durability

Cover - Black, neoprene perforated

Branding - FLEXTRAL LP35-100 1” UL/CGA TYPE 1 LP-GAS HOSE DO NOT EXCEED 350

PSI WP MADE IN U.S.A.

Temperature:

-40°C to +82°C (-40°F to +180°F)

LP35 is a lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all

Underwriters Laboratories (UL21) and Canadian (CSA 8.1 Type I) requirements. The construction incorporates

multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild

chemicals, oil and ozone. LP35 is available in long lengths on reels, long cut lengths and factory-tested assemblies

from stock in popular configurations.

LP35 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard

rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas

accumulates with potentially dangerous consequences. LP35 may be used for natural gas service, but ONLY under

ALL of the following conditions:

•

The application must be in a well-ventilated environment: Outdoors, or indoors with significant

continuous air movement.

•

LP35 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced

permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with

barrier constructions to convey natural gas whenever possible.

LP35 and Compressed Natural Gas (CNG): Do not use LP35 for CNG engine applications in on-road vehicles, or

for high-pressure CNG dispenser/transfer applications (typically 2,900 PSI or greater). In other applications-- where

CNG is regulated to pressures within the rating of LP35-apply the guidelines for natural gas applications stated above.

Always review and adhere to all applicable government and industry regulations and standards prior to installing this

hose in a CNG or natural gas application.

** Never convey LP gas over 140°F/60°C

*** LP fittings ONLY

Part No.

I.D.

Inches

O.D.

Inches

Max W.P.

PSI

Bend Radius

Inches

Weight

lbs / ft

Standard

Lengths

LP35-025

Z\v

0.58

350

3.0

0.14

700’

LP35-038

C\,

0.75

350

3.0

0.21

700’

LP35-050

Z\x

0.91

350

5.0

0.28

700’

LP35-075

C\v

1.33

350

6.0

0.44

350’

LP35-100

1

1.51

350

8.0

0.60

100’/150’/200’

LP35-125

1Z\v

1.85

350

10.0

0.98

300’

LP35-150

1Z\x

2.25

350

12.0

1.26

60’

LP35-200

2

2.86

350

14.0

1.84

60’

LP35-300

3

3.88

350

24.0

2.58

60’