CP800 Series
Single Phase Bridge Rectifiers
Page 1
31/05/05 V1.0
Features:
•• High surge current capability.
•• PCB mounted/screw fixing.
•• Surge overload rating: 200 Amperes peak.
•• Low forward voltage drop and reverse leakage.
•• Small size, simple installation.
•• Reliable low cost construction utilizing moulded plastic technique.
Mechanical Data:
Mounting position
: Any.
Terminals
: Leads solderable per MIL-
STD-202, Method 208.
Mounting
: Through hole for a number 6
screw.
Maximum Ratings and Electrical Characteristics
At 25°C ambient temperature unless otherwise noted; resistive or inductive load at 60Hz.
Parameter
CP802
CP806
CP808
Unit
Maximum recurrent peak reverse voltage
200
600
800
V
Maximum bridge input voltage RMS
140
420
560
Maximum average rectified output at
TC = 50°C
see Figure 2
TA = 40°C
8.0
3.0
A
Peak one cycle surge overload current
200
A
Maximum forward voltage drop per element at 4.0A dc and 25°C
see Figure 3
1.1
V
Maximum reverse leakage at rated DC blocking voltage per element at 25°C
See Figure 4
at 100°C
10.0
1.0
µA
mA
I2t Rating for fusing ( t<8.3ms)
166
A2 seconds
Typical junction capacitance per leg (Note 4) CJ
200
pF
Typical thermal resistance per leg (Note 3) R
θJA
Typical thermal resistance per leg (Note 2) R
θJL
21
6
°C/W
Operating temperature range
-55 to +125
°C
Storage temperature range
-55 to +150
Notes:
1. Bolt down on to a heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer with a
number 6 screw.
2. Units Mounted on a 8.6” x 8.6” x 24” thick (22 x 22 x 0.6cm) Aluminium plate heatsink.
3. Units Mounted on PCB at 0.375” (9.5mm) lead length with 0.5” x 0.5” (12 x 12mm) copper pads.
4. Measured at 1.0MHz and applied reverse voltage.
Dimensions : Inches (Millimetres)
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
