| 数据搜索系统,热门电子元器件搜索 |
|
E5DC-RX2ASM-002 数据表(PDF) 97 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
E5DC-RX2ASM-002 数据表(HTML) 97 Page - Omron Electronics LLC |
|
97 / 112 page ![]() E5 @C/E5@C-T 97 E5 C-T This diagram shows all of the setting levels. To move to the advanced function setting level and calibration level, you must enter passwords. Some parameters are not displayed depending on the protect level setting and the conditions of use. *1 Set the PF Setting parameter to a-m (Auto/Manual). *2 The No. 1 display will flash when the keys are pressed for 1 s or longer. *3 Set the PF Setting parameter to pfdp (monitor/setting items). Calibration Level Control stops. Advanced Function Setting Level Advanced settings Communications Setting Level Power ON Initial Setting Level Operation Level Adjustment Level Monitor/Setting Item Level Press O and M Keys for at least 1 s. Starting in manual mode Level changes automatically. Press O Key for less than 1 s. Protect Level Manual Control Level Used to set the MV manually. Used for SPs and other basic settings and monitoring. Press O Key for at least 3 s while a-m is displayed.*2 Used to set protection for operations. Enter the password (1201) while cmov (Move to Calibration Level parameter) is displayed. Used to set the input type and other basic settings. Press S Key. *3 Used to display specified monitor and setting items. Press O or S Key for at least 1 s. *1 Program Setting Level Parameter and segment settings for all programs Press S Key for at least 1 s.*1 Press O Key for at least 1 s. Press O Key for less than 1 s. Press O Key for less than 1 s. Press O Key for less than 1 s. PID Setting Level Parameters for all PID sets (e.g., PID constants) Adjustment parameters (e.g., PID constants for current PID set) Press O Key for at least 3 s.*2 Press S Key. *3 Press O Key for less than 1 s (only models with communications). Press O Key for at least 1 s. Communications settings Release protection and then enter the password (−169) for the amoV (Move to Advanced Function Setting Level) parameter. Press O and M Keys for at least 3 s.*2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |