 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
E5DC-RX2DBM-002 数据表(PDF) 89 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
E5DC-RX2DBM-002 数据表(HTML) 89 Page - Omron Electronics LLC |
|
|
89 / 138 page  E5CC-T 89 Nomenclature Dimensions (Unit: mm) Controllers No. 1 display No. 2 display PV or specified monitor/setting parameter SP or specified monitor/parameter value Top-panel Setup Tool port Use the UD Keys to set the parameter. Press U Key for at least 1 second when Process value/Set point parameter are displayed in Program SP Mode to go to Display Segment Selection parameter in Program Setting Level. Top View of E5CC-T Operation indicators Temperature unit Press O Key once to go to Program Setting Level. Press O Key for at least 3 seconds to go to Initial Setting Level. Use the M Key to change to another parameter. Press M and D Keys simultaneously for at least 1 second to switch between run and reset status. Use S Key to change the digit (default setting). Front panel E5CC-T 45+0.6 0 45+0.6 0 45+0.6 0 60 min. (48 × number of units - 2.5)+1.0 0 Panel Cutout Mounted Separately Group Mounted Group mounting does not allow waterproofing. 48 × 48 (64) 60 4 1 48 × 48 Mounting Adapter (Accessory, Y92F-49 (also available for ordering separately)) Waterproof Packing (Accessory, Y92S-P8 (also available for ordering separately)) E5CC-T • Recommended panel thickness is 1 to 5 mm. • Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.) • To mount the Controller so that it is waterproof, insert the water- proof packing onto the Controller. • When two or more Controllers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications. • Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a USB-Serial Conversion Cable are used together. The Setup Tool port is on the top of the Temperature Controller. It is used to connect the Temperature Controller to the computer to use the Setup Tool. The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection. Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure. Note: Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
