LTRB R37G

DATASHEET

DATASHEET

28 | Version 1.4 | 2025-12-03

Notes

The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of

lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this

data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-

sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the

eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light

sources have a high secondary exposure potential due to their blinding effect. When looking at bright light

sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-

tion, annoyance, visual impairment, and even accidents, depending on the situation.

Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.

Metal filled materials can be affected by environments that contain traces of aggressive substances. There-

fore, we recommend that customers minimize device exposure to aggressive substances during storage,

production, and use. Devices that showed visible discoloration when tested using the described tests above

did show no performance deviations within failure limits during the stated test duration. Respective failure

limits are described in the IEC60810.

Changes to the content of this datasheet may occur without further notification. JEDEC 46C constitutes the

guideline of the change management for the device specified in this document.

For further application related information please visit https://ams-osram.com/support/application-notes