www.panduit.com

key features and benefits

applications

technical information

specifications

Category 6A/Class EA, 8-position, female to female, UTP

coupler module shall provide easy plug and play pass

through connectivity. Coupler module shall act as one

connecting hardware component in the channel. Coupler

modules shall be available individually or installed in a

24-port flat patch panel. Couplers shall be compatible

with 6 or 8-position RJ45 UTP patch cords with T568A

and T568B wiring schemes.

100% performance tested

Confidence that each coupler will deliver the critical

electrical performance requirements

Modular

Couplers snap in and out of all Mini-Com® Faceplates,

Modular Patch Panels and industrial bulkheads for easy

moves, adds and changes

RJ45 interface

Industry standard interface provides a quick and easy

plug and play connection to RJ45 patch cords;

backwards compatible

Identification

Can be clearly identified with optional labels and icons for

port identification

Populated patch panel version

Factory installed 24-port patch panel mounts to standard

EIA 19" or 23" racks for greater system flexibility

Block out device (optional)

Provides a simple and secure method to control access to

data ports while not in use

Mini-Com® TX6A™ 10Gig™ UTP Coupler

Modules and Patch Panels are a component

of the TX6A™ 10Gig™ UTP Copper

Cabling System. This end-to-end system

is interoperable and backwards compatible,

providing design flexibility to protect network

investments well into the future. Couplers

are designed to perform as a single connector

in the channel. One coupler can be used per

channel while maintaining Category 6A/Class

EA performance. Couplers are a reliable,

modular solution, ideal when setting up

networks in a testing environment or

during a planned system upgrade.

With certified performance to the

ANSI/TIA-568-C.2 Category 6A and ISO

11801 Class EA standards, this system will

support the following applications:

• Ethernet 10BASE-T, 100BASE-T

(FastEthernet), 1000BASE-T

(Gigabit Ethernet)

• 155 Mb/s ATM, 622 Mb/s ATM,

1.2 Gb/s ATM

• Token Ring 4/16

• Digital video and broadband/baseband

analog video

• Voice over Internet Protocol (VoIP)

Mini-Com® TX6A™ 10Gig™ UTP

Coupler Module and Patch Panel

SPECIFICA TION SHEET

TX6A™ 10Gig ® UTP

Copper Cabling System

Mini-Com® TX6A™ UTP

Copper Modules

Coupler Module:

CC6X88‡

Mini-Com® TX6A™ 10Gig ® UTP

Coupler Patch Panel

24-port, 1 RU:

CP246X88BL

TX6A™ 10Gig ® UTP Patch Cords

with MaTriX Technology

CM (foot lengths):

UTP6A^

CM (meter lengths): UTP6A^^M

TX6A-SD™ 10Gig ® UTP Patch

Cords with MaTriX Technology

CM (ft lengths):

UTP6ASD^BU

CM (m lengths):

UTP6ASD^^MBU

LSZH (m lengths):

UTP6ASDL^^M

Mini-Com® Angled Modular

Patch Panels

24-port, 1 RU:

CPPA24FMWBLY

48-port, 2 RU:

CPPA48FMWBLY

72-port, 2 RU:

CPPLA72WBLY

Mini-Com® Flat Modular

Patch Panels

24-port, 1 RU:

CPP24FMWBLY

48-port, 2 RU:

CPP48HDWBLY

48-port, 1 RU:

CPP48FMWBLY

72-port, 2 RU:

CPP72FMWBLY

Tools and Accessories

Jack module

termination tool:

TGJT or EGJT

Wire snipping tool: CWST

Wire stripping tool: CJAST

Clear dust cap:

MDC-C

Blockout device:

PSL-DCJB-^^^

Phone icons:

CIPIW-C++

Data icons:

CIDIW-C++

‡ For additional colors, add suffix: BL (Black),

IW (Off White), BU (Blue), RD (Red), GR

(Green), OR (Orange), IG (International Gray),

or YL (Yellow).

^ For lengths 3 to 20 feet (one foot increments)

and 25, 30, 35, 40 feet, change the length

designation in the part number to the desired

length. For standard cable colors other than

Off White, add suffix BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green),

OR (Orange) or VL (Violet). For example,

UTP6A15BU = blue, 15-foot patch cord.

^^ For lengths 1, 1.5, 2 to 7 (one meter

increments), 10, 15, 20 meters, change the

length designation in the part number to the

desired length. For standard cable colors

other than Off White, add suffix BL (Black),

BU (Blue), RD (Red), YL (Yellow), GR (Green),

OR (Orange) or VL (Violet). LSZH patch cable

available in Off White or BU (Blue). For

example, UTP5ASD5MBU = blue, 5-meter

patch cord.

^^^To designate color other than Red, add

suffix BL (Black), BU (Blue), YL (Yellow),

GR (Green), OR (Orange), IW (Off White) or

IG (International Gray) at the end of the part

number. 10/package.

++To designate color other than IW (Off White),

replace IW with EI (Electric Ivory),

IG (International Gray), BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green),

OR (Orange) or VL (Violet) in the part number.

100/package.

Category 6A/Class EA

channel performance:

Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6A

and ISO11801 Class EA standards for supporting 10GBASE-T

transmission over twisted pair cabling systems in a 4-connector

configuration up to 100 meters

One coupler can be used per channel while maintaining Category

6A/Class EA performance

FCC and

ANSI/TIA compliance:

Meets ANSI/TIA-1096-A; contacts plated with 50 microinches

of gold for superior performance

IEC compliance:

Meets IEC 60603-7

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

RoHS compliance:

Compliant

c(UL)US rated:

UL 1863, CSA Standard C22.2