www.panduit.com

SPECIFICATION SHEET

applications

45° Angled Wire Caps can be used with compatible

TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack

Modules where ever an angled cable exit from the

modular jack is desired and in confined jack

mounting spaces such as in modular furniture,

raceway, and wall outlets with conduit. 45° Angled

Wire Caps are especially beneficial for use with

Category 6A cabling which is increasingly being

deployed in office and furniture applications, since

their angled routing better accommodates the larger

bundle diameter and bigger bend radius of Category

6A cable.

specifications

45° Angled Wire Caps for TX6A, TX6 PLUS and

TX5e Mini-Com® UTP Jack Modules

technical information

Channel and

component

performance^:

Exceeds channel and component requirements of ANSI/TIA-568-C.2 and ISO 11801

standards for the respective Category or Class performance levels at the designated

swept frequencies for that Category or Class

IEC compliance^:

Meets IEC 60603-7

RoHS compliance:

Compliant

PoE compliance^:

Supports 2500 connection cycles with IEEE 802.3af / 802.3at and proposed

802.3bt type 3 and type 4

UL rated^:

UL 1863 and UL 2043

Operating

temperature:

-10°C to 65°C (14°F to 149°F)

Conductor

termination range:

Compatible with 22 – 26 AWG solid or stranded cable with conductor insulation

diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in

Depth reduction

provided:

Allows 55% reduction in cable routing depth compared to straight exit wire cap

with both allowing proper cable bend radius for 0.275 inch (6.99 mm) diameter

cable (0.500" with angled caps vs. 1.100" with straight exit caps)

^When mated to compatible UTP jack modules.

key features and benefits

Angled cable exit:

Large diameter cable can be routed to jacks in tight spaces while maintaining

proper bend radius; also can be used on multiple jacks positioned next to

each other

Reversible direction

design:

Both wire cap versions can be inserted into compatible jacks in either

direction, bringing the convenience of needing only two parts to handle up,

down, left, or right cable routing needs

Wide compatibility:

Immediate compatibility with Panduit’s most common Mini-Com® UTP jacks

Economical:

Angled wire caps can easily be applied to new or already installed compatible

jacks to gain routing advantages without needing to purchase new jacks

Uses enhanced Giga-TX

Technology:

Optimizes performance by eliminating conductor untwist and reduces

installation time and expense

Consistent termination

design:

Similarity in both conductor management and termination method to

Panduit’s most common straight exit Mini-Com® UTP jacks; ensures minimal

learning curve and fast field terminations

Termination tool available: TGSJT termination tool functions for both wire cap versions and ensures

conductors are fully terminated by utilizing a smooth forward motion without

impact on critical internal components for maximum reliability

45° angled wire caps, when mated with compatible UTP jack

modules, shall provide improved cable routing to jacks in confined

spaces. Angled wire caps shall terminate 4-pair, 22 - 26 AWG, 100

ohm unshielded twisted pair cable and shall use a forward motion

termination method to optimize performance by maintaining cable pair

geometry while eliminating conductor untwist.

The wire caps shall be color-coded to designate performance category

and shall include a universal label coded for T568B wiring schemes.

45° Angled Wire Caps for Mini-Com ®

UTP Jack Modules

Up/Down 45° Angle Caps

TX6A™:

CJUDCAPBU-%

TX6 ™ PLUS:

CJUDCAPIW-%

TX5e™:

CJUDCAPRD-%

Left/Right 45° Angle Caps

TX6A™:

CJLRCAPBU-%

TX6 ™PLUS:

CJLRCAPIW-%

TX5e™:

CJLRCAPRD-%

Compatible Mini-Com ® UTP Jack

Modules TX6A™ UTP with MaTriX

Technology

Mini-Com® UTP Jack Modules

TX6A™:

CJ6X88TG*

TX6 ™ PLUS:

CJ688TG*

TX5e™:

CJ5E88TG*

Mini-Com® Spring Shuttered UTP

Jack Modules

TX6A™:

CJH6X88TG*

TX6 ™PLUS:

CJH688TG*

TX5e™:

CJH5E88TG*

Tools and Accessories

Jack module

Termination tool:

TGSJT

Wire snipping tool: CWST

Wire stripping tool: CJAST

% = Package size (X = 10, C = 100)

* To designate color, add suffix IW (Off White),

EI (Electric Ivory), IG (International Gray),

AW (Arctic White), BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green),

OR (Orange,) BR (Brown), GD (Gold), LB

(Light Blue), PK (Pink) or VL (Violet).