www.panduit.com

specifications

Category 6/Class E, 8-position, UTP jack module shall terminate 4-pair, 22 – 26 AWG,

100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool.

UTP jack modules shall use a forward motion termination method to optimize

performance by maintaining cable pair geometry while eliminating conductor untwist.

The termination cap shall be color-coded white to designate Category 6 performance

and shall include a universal label coded for T568A and T568B wiring schemes.

Mini-Com® TX6™ PLUS UTP Jack Modules

SPECIFICA TION SHEET

technical information

Category 6/Class

E channel and

component

performance:

Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801

Class E standards at swept frequencies 1 to 250 MHz

Exceeds component requirements of ANSI/TIA-568-C.2 Category 6 and ISO

11801 Class E standards at swept frequencies 1 to 250 MHz

FCC and

ANSI compliance:

Meets ANSI/TIA-1096-A contacts plated with 50 microinches of gold for

superior performance

IEC compliance:

Meets IEC 60603-7 and IEC 60512-99-001

RoHS compliance:

Compliant

PoE compliance:

Rated for 2500 cycles with IEEE 802.3af / 802.3at and proposed 802.3bt

type 3 and type 4

UL rated:

UL 1863 (Use as communications circuit accessory)

UL 2043 (Suitable for use in air-handling spaces)

Operating

Temperature:

-10°C to 65°C (14°F to 140°F)

Conductor

termination range:

Wire cap compatible with 22 – 26 AWG solid or stranded cable with conductor

insulation diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in.

key features and benefits

100% performance tested

Confidence that each jack module will deliver the critical electrical

performance requirements

Utilizes enhanced

Giga-TX ™ Technology

Optimizes performance by eliminating conductor untwist and reduces

installation time and expense

Modular

UTP jack modules snap in and out of all Mini-Com® Faceplates, Modular

Patch Panels and Surface Mount Boxes for easy moves, adds,

and changes

Individually serialized

Marked with quality control number for future traceability

RJ45 interface

Industry standard interface provides a quick and easy plug and play

connection to RJ45 patch cords; backwards compatible

Identification

Can be clearly identified with optional labels and icons for port identification

Angle termination

version available

Side opening allows cable to be terminated to the right or left side of the

jack module; ideal for installations that have minimal depth that may not

allow standard bend radius practices to be accommodated

Termination tools

(optional)

EGJT termination tool ensures conductors are fully terminated by utilizing

a smooth forward motion without impact on critical internal components

for maximum reliability; TGJT termination tool ideal for high

volume installations

Block out device (optional) Provides a simple and secure method to control access to data ports while

not in use

Shuttered version

(optional)

Integrated spring shuttered door keeps out dust and debris of unmated

RJ45 jack modules automatically

applications

Mini-Com® TX6™ PLUS UTP Jack Modules are a component of the TX6™ PLUS UTP Copper Cabling

System. This end-to-end system is interoperable and backwards compatible, providing design flexibility

to protect network investments well into the future. With certified performance to the ANSI/TIA-568-C.2

Category 6 and ISO 11801 Class E standards, this system is ideal for today's high performance workstation

applications. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E

standards, these systems will support the following applications:

• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet)

• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM

• Token Ring 4/16

• Digital video and broadband/baseband analog video

• Voice over Internet Protocol (VoIP)

TX6 ™ PLUS UTP Copper

Cabling Systems

Mini-Com ® TX6™ PLUS

UTP Jack Modules

Jack module:

CJ688TG*

Shuttered jack

module:

CJH688TG*

Right angle

jack module:

CJR688TG*

TX6000 ™ UTP Copper Cable

Plenum:

PUP6004***

Riser:

PUR6004***

LSZH (60332-1):

PUZ6004***

LSZH (60332-3):

PUL6004***

CM:

PUC6004***

Category 6 Performance SD UTP 28 AWG

Patch Cords (Dual Rated CM/LSZH)

Feet:

UTP28SP^

Meters:

UTP28SP^^M

TX6 ™ PLUS UTP Patch Cords

CM (foot lengths):

UTPSP^Y

CM (meter lengths):

UTPSP^^MY

LSZH (meter lengths): UTPSPL^^MY

Mini-Com ® Angled Modular

Patch Panels

24-port, 1 RU:

CPPLA24WBLY

48-port, 2 RU:

CPPLA48WBLY

Mini-Com ® Flat Modular

Patch Panels

24-port, 1 RU:

CPPL24WBLY

48-port, 2 RU:

CPPL48WBLY

For additional modular patch panels and

punchdown patch panels, visit www.panduit.com

Tools and Accessories

Jack module

termination tool:

EGJT or TGJT

Wire snipping tool:

CWST

Wire stripping tool:

CJAST

Clear dust cap:

MDC-C

Block out device:

PSL-DCJB-^^^

Phone icons:

CIPIW-C+

Data icons:

CIDIW-C+

*To designate color, add suffix: IW (Off White), replace

IW suffix with WH (White), EI (Electric Ivory), WH (White),

IG (International Gray), AW (Arctic White), BL (Black),

BU (Blue), RD (Red), YL (Yellow), GR (Green),

OR (Orange), VL (Violet), BR (Brown), GD (Gold), LB

(Light Blue), or PK (Pink).

***To designate color, add suffix BU (Blue) or WH (White).

For additional cable colors, contact customer service.

^For lengths 1 to 20 feet (one foot increments) and 25,

30, 35, 40 feet, change the length designation in the part

number to the desired length. For standard cable colors

other than Off White, add suffix BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green), OR (Orange), or

VL (Violet). For example, the part number for a blue

15-foot patch cord is UTPSP15BUY.

^^For lengths 1 to 10 meters (one meter increments) and

2.5, 15, 20, 25, 30, 35, 40 meters, change the length

designation in the part number to the desired length. For

standard cable colors other than Off White, add suffix

BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green),

OR (Orange), or VL (Violet). For example, the part number

for a blue 15-meter patch cord is UTPSP15MBUY.

^^^To designate color other than Red, add suffix

Black (BL), Blue (BU), Yellow (YL), Green (GR),

Orange (OR), Off White (IW) or International Gray (IG)

at the end of the part number. 10/package.

+

To designate color other than IW (Off White),

replace IW with EI (Electric Ivory), IG (International Gray),

BL (Black), BU (Blue), RD (Red), YL (Yellow),

GR (Green), OR (Orange), or VL (Violet) in the part

number. 100/package.

Contact customer service for bulk packaged and/

or keyed jack modules and patch cords.