Document No. 008-0308-0

Page 5 - 5

Rev. C

MP Series

Low Cost Quartz Crystal

QUALITY AND RELIABILITY

Quality systems meet or exceed the requirements of ISO 9000:2000 standards.

PACKAGING INFORMATION

ENVIRONMENTAL SPECIFICATIONS

Temperature Cycle:

400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1

minute transfer time between temperatures.

Mechanical Shock:

1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3

mutually perpendicular planes (18 total shocks).

Sinusoidal Vibration:

0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles

each in 3 mutually perpendicular planes (9 times total).

Gross Leak:

No leak shall appear while immersed in an FC40 or equivalent liquid at

+125°C for 20 seconds.

Fine Leak:

Resistance to Solder Heat:

Product must survive 3 reflows of +260°C peak, 10 seconds maximum.

High Temperature Operating Bias:

2,000 hours at +125°C, disregarding frequency shift.

Frequency Aging:

1,000 hours at +85°C, maximum ±5 ppm shift.

Insulation Resistance:

Moisture Sensitivity Level:

Level 1 per JEDEC J-STD-020.

MP Taping (Ammopak)

Ø4.00

0.90 Max

18.00

18.00

32.50 Max

DIMENSIONS IN MILLIMETERS

3.81

12.70