| 数据搜索系统,热门电子元器件搜索 |
|
TDA7333N 数据表(PDF) 21 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TDA7333N 数据表(HTML) 21 Page - STMicroelectronics |
|
21 / 36 page ![]() TDA7333N Functional description 21/36 The meaning of each bit is described below: 3.8.1 rds_int register rds_bd_ctrl[7:0] read/write frequency, quality sensitivity, demodulator pll settings sinc4reg[7:0] read/write sinc4 filter settings (for internal use only) testreg[7:0] read/write test modes (for internal use only) pllreg4[7:0] read/write PLL control register 4 pllreg3[7:0] read/write PLL control register 3 pllreg2[7:0] read/write PLL control register 2 pllreg1[7:0] read/write PLL control register 1 pllreg0[7:0] read/write PLL control register 0 Table 7. Registers description (continued) Register Access rights Function (1) If the interrupt source is changed form block A, B, D, TA, TA EON to another one "no interrupt" must be set before to clear the previous interrupt acknowledge. Interrupt bit. It is set to one on every programmed interrupt. It is reset by reading rds_int register. The inverted version is also externally available on RDSINT pin. itsrc[2:0] selects interrupt source (1). Block A, B, D and TA, TA EON interrupts only if "synch" =1. Synchronization information (refer to pages 13-15). 1: The module is already synchronized. 0: The module is synchronizing. It is used to force a resynchronization. If it is set to one, the RDS modules are forced to resynchronization state and the RAM buffer address is reset. This bit is reset automatically. It is read always as zero. Buffer not empty. 1: At least one block is present in the RAM buffer. 0: The RAM buffer is empty. rds_int, rds_bd_ctrl and pllreg4-0 write order. This bit is only used in SPI mode and is read always as zero. 1: Update of rds_int, rds_bd_ctrl and pllreg4-0 with data shifted in. 0: No update of rds_int, rds_bd_ctrl and pllreg4-0. bit name access bit 7 bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 r r/w r r/w r r/w r/w r/w itsrc0 int ar_res bne itsrc1 synch write reset value 0 00 0 0 00 0 itsrc2 (1) itsrc2 0 0 itsrc1 interrupt source itsrc0 buffer not empty block B block A buffer full block D TA TA EON no interrupt 0 0 10 0 11 1 10 1 11 0 01 1 00 1 01 rds_int |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |