| 数据搜索系统,热门电子元器件搜索 |
|
S32K311NHT0MLFST 数据表(PDF) 72 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
S32K311NHT0MLFST 数据表(HTML) 72 Page - NXP Semiconductors |
|
72 / 142 page ![]() inch. For signals with frequency greater than 63MHz, a maximum 2 inch PCB trace is assumed. For best signal integrity, the series resistance in the transmission line should be matched closely to the selected output resistance (ROUT_*) of the I/O pad. 2. GPIO rise/fall time specifications are derived from simulation model for the defined operating points (between 20% and 80% of VDD_HV_A/B level). Actual application rise/fall time should be extracted from IBIS model simulations with the microcontroller models and application PCB. 3. GPIO output transistion time information can be obtained from the device IBIS model. IBIS models are recommended for system level simulations, as discrete values for I/O transition times are not representative of the I/O pad behavior when connected to an actual transmission line load. 4. Output timing valid for maximum external load C L = 50pF (includes PCB trace, package trace, and external device input load). RDSON RPCB = RDSON PCB External device MCUsee note 1 RDSON 5 in. (4 layer FR4) CPCB = ~3.3 pF/inch * 5 inch CL = 8 pF 1. See IBIS models for further details. Notes: Figure 33. Reference Load Diagram 8 Glitch Filter The glitch filter parameters in the following table apply to the filters of WKPU pins and TRGMUX inputs 60-63. Table 28. Glitch Filter Symbol Description Min Typ Max Unit Condition Spec Number TFILT Glitch filter max filtered pulse width 1,2,3 — — 20 ns — — TUNFILT Glitch filter min unfiltered pulse width 2,3,4 400 — — ns — — 1. Pulses shorter than defined by the maximum value are guaranteed to be filtered (not passed). 2. An input signal pulse is defined by the duration between the input signal's crossing of a Vil/Vih threshold voltage level, and the next crossing of the opposite level. 3. Pulses in between the max filtered and min unfiltered may or may not be passed through. 4. Pulses larger than defined by the minimum value are guaranteed to not be filtered (passed). 9 Flash memory specification NXP Semiconductors Glitch Filter S32K3xx Data Sheet, Rev. 9, 01/2024 Data Sheet: Technical Data Preliminary Information for S32K388 72 / 142 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |