| 数据搜索系统,热门电子元器件搜索 |
|
SR731JTTDR10D 数据表(PDF) 2 Page - KOA Speer Electronics, Inc. |
|
|
|||||||||||||||||||||||||||||
SR731JTTDR10D 数据表(HTML) 2 Page - KOA Speer Electronics, Inc. |
|
2 / 3 page ![]() THICK FILM (LOW RESISTANCE) SR73 Low Resistance Flat Chip Resistors ■Construction Coating color:Black (1H) Indigo (1E, 1J, 2A, 2B, 2E, W2H, W3A, W3A2) ① Protective coating ② Resistive film ③ Inner electrode ④ Ni plating ⑤ Solder plating ⑥ Ceramic substrate L c c W t d ③ ② ① ④ ⑤ ⑥ EU RoHS ■Type Designation Example SR73 2B T TD R10 J Product Code Power Rating 1H:0.1W 1E:0.166W 1J :0.2W 0.25W 2A:0.33W 0.5W※5 2B:0.33W 0.5W※5 2E:0.5W 0.66W※5 W2H:0.75W W3A:1.0W W3A2:2.0W※5 Terminal Surface Material T :Sn G:Au※2 (L:Sn/Pb)※3 Taping TCM:2mm pitch press paper TPL・TP: 2mm pitch punch paper TD:4mm pitch punch paper TE:4mm pitch plastic embossed BK:Bulk Nominal Resistance D,F :4 digits G,J :3 digits Ex. 0.1Ω:R100 47mΩ:47L Resistance Tolerance D :±0.5% F :±1% G :±2% J :±5% Resistance Value (Ω) 3digits 24m∼91m 24L∼91L 0.1∼0.91 R10∼R91 1∼9.1 1R0∼9R1 10 100 Resistance Value (Ω) 4digits 0.1∼0.976 R100∼R976 1∼9.76 1R00∼9R76 10 10R0 ■Dimensions Type (Inch Size Code) Dimensions(mm) Weight(g) (1000pcs) L W c d t 1H(0201) 0.6±0.03. 0.3±0.03 0.1±0.05 0.15±0.05 0.23±0.03 0.14 1E(0402) 1.0 . 0.5 . 0.25±0.1 0.25±0.1 0.35±0.05 0.68 1J(0603) 1.6±0.2 0.8 . 0.35±0.1 0.35±0.1 0.45±0.1 2.14 2A(0805) 2.0±0.2 1.25±0.1 0.4±0.2 0.3 . 0.5±0.1 4.54 2B(1206) 3.2±0.2 1.6±0.2 0.5±0.3 0.4 . 0.6±0.1 9.14 2E(1210) 2.6±0.2 15.50 W2H(2010)※1 5.0±0.2 2.5±0.2 0.65±0.15 24.30 W3A(2512)※1 6.3±0.2 3.1±0.2 37.10 W3A2(2512)※1 +0.2 −0.1 +0.2 −0.1 +0.1 −0.05 +0.1 −0.05 +0.15 −0.1 ※1 SR73 2H, 3A and 3A2 are also still available (different“d”dimensions=0.4 mm) +0.2 −0.1 When the terminal part temperature of the resistor exceeds the rated terminal part temperature shown above, the power shall be derated according to the derating curve. ※Please refer to“Introduction of the derating curves based on the terminal part temperature”on the beginning of our catalog before use. 100 80 60 40 20 0 -60 -40 -20 0204060 150 -55 80 100 120 140 160 Terminal part temperature(℃) 110 105 95 あ1 あ1 2B: 0.5W(110℃) 2E: 0.66W(110℃) 2A: 0.5W(105℃) W3A2: 2.0W(95℃) Terminal part temperature SR73 2A(0.5W),SR73 2B(0.5W), SR73 2E(0.66W),SR73 W3A2 ■Derating Curve For resistors operated at an ambient temperature of 70℃ or higher, the power shall be derated in accordance with the above derating curve. 100 80 60 40 20 0 -60 -40 -20 0204060 70 150 -55 80 100 120 140 160 Ambient temperature(℃) 125 あ1 あ1 1H 1E,1J,2A, 2B,2E,W2H, W3A(1W), W3A2(2W) 100 80 60 40 20 0 -60 -40 -20 0204060 150 -55 80 100 120 140 160 Terminal part temperature(℃) 125 あ1 あ1 1E: 0.166W(125℃) 1J: 0.2W/0.25W(125℃) 2A: 0.33W(125℃) 2B: 0.33W(125℃) 2E: 0.5W(125℃) W2H: 0.75W(125℃) W3A: 1.0W(125℃) Terminal part temperature Ambient temperature ■Features ・Current detecting resistors for power supply, motor circuits, etc. ・High reliability and performance with resistance tolerance ± 0.5%, T.C.R. ±100×10−6/K ・Suitable for both reflow and flow solderings. ・Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. ・AEC-Q200 Tested (Exemption 1H). ■Applications ・Car electronics, Computers, HDDs, Cellular-telephones, Power supplies, and Motor circuits, etc. ■Reference Standards IEC 60115-8 JIS C 5201-8 EIAJ RC-2134C ※2 Products with gold plated electrodes are also available only 1J, 2A and 2B type (0.1Ω∼10Ω、F:±1%、J:±5%), so please consult with us. ※3 With type 1H, W2H and W3A, W3A2 only T is available as the terminal surface material. The terminal surface material lead free is standard. Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS. For further information on taping, please refer to APPENDIX C on the back pages. ■Ratings Type Power Rating Rated Ambient Temp. Rated Terminal Part Temp. T.C.R. (×10−6/K) Resistance Range(Ω) Taping & Q’ty /Reel (pcs) D:±0.5% E24・E96 F:±1% E24・E96 G:±2% E24 J:±5% E24 TCM TPL・TP TD TE 1H※4 0.1W 70℃ ̶ 0∼+4000 ̶ 1∼10. ̶ 0.27∼10 TCM:15,000 ̶ ̶ ̶ 0∼+5000 ̶ ̶ ̶ 0.18∼0.24 1E※4 0.166W 70℃ 125℃ ±2000 ̶ 0.51∼10.0 0.51∼10.0 0.51∼10 ̶ TPL:20,000 TP :10,000 ̶ ̶ ±3000 ̶ 0.2∼0.47 0.2∼0.47 0.2∼0.47 ±5000 ̶ 0.1∼0.18 0.1∼0.18 0.1∼0.18 1J 0.2W 70℃ 125℃ ±2000 ̶ 1.02∼10. 1.1∼10. 1.1∼10. ̶ TP :10,000※6 5,000 0.25W 70℃ 125℃ ±2000 ̶ 0.1∼1 0.1∼1 . 0.1∼1 . 2A 0.33W 70℃ 125℃ ±1000 0.15∼10 0.1∼10. ̶ ̶ ̶ TP :10,000※6 5,000 4,000※6 ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.051∼0.091 ±8000 ̶ ̶ ̶ 0.03∼0.047 0.5W※5 70℃ 105℃ ±1000 0.15∼10 0.1∼10. ̶ ̶ ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.051∼0.091 ±8000 ̶ ̶ ̶ 0.03∼0.047 2B 0.33W 70℃ 125℃ ±1000 0.15∼10 0.1∼10. ̶ ̶ ̶ ̶ 5,000 4,000※6 ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.056∼0.091 ±8000 ̶ ̶ ̶ 0.03∼0.051 0.5W※5 70℃ 110℃ ±1000 0.15∼10 0.1∼10. ̶ ̶ ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.056∼0.091 ±8000 ̶ ̶ ̶ 0.03∼0.051 2E 0.5W 70℃ 125℃ ±1000 ̶ 0.1∼10. ̶ ̶ ̶ ̶ 5,000 4,000※6 ±2000 ̶ ̶ 0.1∼10. 0.047∼10.00 ±5000 ̶ ̶ ̶ 0.036∼0.043 ±1000 ̶ ̶ ̶ 0.024∼0.033 0.66W※5 70℃ 110℃ ±1000 ̶ 0.1∼10. ̶ ̶ ±2000 ̶ ̶ 0.1∼10. 0.047∼10.00 ±5000 ̶ ̶ ̶ 0.036∼0.043 ±1000 ̶ ̶ ̶ 0.024∼0.033 W2H 0.75W 70℃ 125℃ ±1000 ̶ 0.1∼10. ̶ ̶ ̶ ̶ ̶ 4,000 ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.056∼0.091 ±8000 ̶ ̶ ̶ 0.033∼0.051 W3A 1W 70℃ 125℃ ±1000 ̶ 0.1∼10. ̶ ̶ ̶ ̶ ̶ 4,000 ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.056∼0.091 ±8000 ̶ ̶ ̶ 0.039∼0.051 W3A2 2W※5 70℃ 95℃ ±1000 ̶ 0.1∼10. ̶ ̶ ̶ ̶ ̶ 4,000 ±2000 ̶ ̶ 0.1∼10. 0.1∼10. ±5000 ̶ ̶ ̶ 0.056∼0.091 ±8000 ̶ ̶ ̶ 0.039∼0.051 Operating Temperature Range:−55℃∼+125℃(1H)、−55℃∼+150℃(1E、1J、2A、2B、2E、W2H、W3A、W3A2) Rated voltage= Power Rating×Resistance value ※4 The nominal resistance value for SR73 1H, SR73 1E(F:±1%)is in E24. ※5 If you use at the rated power, please keep the condition that the terminal of the resistor is below the rated terminal part temperature. Please refer to the derating curves based on the terminal temperature of right side on the previous page. ※6 Standard packaging:TD(4mm pitch punch paper) If any questions arise whether to use the“Rated Ambient Temperature”or the“Rated Terminal Part Temperature”in your usage conditions, please give priority to the“Rated Terminal Part Temperature”. For more details, please refer to“Introduction of the derating curves based on the terminal part temperature”on the beginning of our catalog. While using under high power, the temperature of the product may increase depending on the condition of heat dissipation from PCB. Be sure to check the terminal part temperature as well as precausions to use on delivery specifications before use. √ ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄ Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. Malfunction or failure of the products in such applications may cause loss of human life or serious damage. www.koaglobal.com Oct. 2024 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |