ST72104G2 datasheet(114/135 Pages) STMICROELECTRONICS

114 / 135 page

ST72104G, ST72215G, ST72216G, ST72254G

114/135

13.8 I/O PORT PIN CHARACTERISTICS

13.8.1 General Characteristics

Subject to general operating conditions for VDD,fOSC, and TA unless otherwise specified.

Figure 77. Two typical Applications with unused I/O Pin

Figure 78. Typical IPU vs. VDD with VIN=VSS

Notes:

1. Unless otherwise specified, typical data are based on TA=25°C and VDD=5V.

2. Data based on characterization results, not tested in production.

3. Hysteresis voltage between Schmitt trigger switching levels. Based on characterization results, not tested.

4. Configuration not recommended, all unused pins must be kept at a fixed voltage: using the output mode of the I/O for

example or an external pull-up or pull-down resistor (see Figure 77). Data based on design simulation and/or technology

characteristics, not tested in production.

5. The RPU pull-up equivalent resistor is based on a resistive transistor (corresponding IPU current characteristics de-

scribed in Figure 78). This data is based on characterization results, tested in production at VDD max.

6. Data based on characterization results, not tested in production.

7. To generate an external interrupt, a minimum pulse width has to be applied on an I/O port pin configured as an external

interrupt source.

Symbol

Parameter

Conditions

Min

Typ 1)

Max

Unit

VIL

Input low level voltage 2)

0.3xV

VIH

Input high level voltage 2)

0.7xV

Vhys

Schmitt trigger voltage hysteresis 3)

400

Input leakage current

VSS≤VIN≤VDD

±1

µA

Static current consumption 4)

Floating input mode

200

RPU

Weak pull-up equivalent resistor 5)

VIN=VSS

VDD=5V

120

250

Ω

VDD=3.3V

170

200

230

CIO

I/O pin capacitance

tf(IO)out

Output high to low level fall time 6)

CL=50pF

Between 10% and 90%

tr(IO)out

Output low to high level rise time 6)

tw(IT)in

External interrupt pulse time 7)

1tCPU

10k

Ω

UNUSED I/O PORT

ST72XXX

10k

Ω

UNUSED I/O PORT

ST72XXX

VDD

3.5

4.5

5.5

Vdd [V]

Ipu [

µA]

Ta=-40

°C

Ta=25

°C

Ta=85

°C

Ta=125

°C

ST72104G2 数据表(PDF) 114 Page - STMicroelectronics

ST72104G2 数据表(HTML) 114 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载