M41T00

DC and AC parameters

19/25

5

DC and AC parameters

This section summarizes the operating and measurement conditions, as well as the dc and

ac characteristics of the device. The parameters in the following DC and AC characteristic

tables are derived from tests performed under the measurement conditions listed in the

relevant tables. Designers should check that the operating conditions in their projects match

the measurement conditions when using the quoted parameters.

Figure 14. AC testing input/output waveform

Table 7.

1.

Output Hi-Z is defined as the point where data is no longer driven.

Parameter

M41T00

2.0 to 5.5 V

-40 to 85 °C

100 pF

Input rise and fall times

≤ 5 ns

Input pulse voltages

Input and output timing reference voltages

Table 8.

Capacitance

Symbol

1.

Effective capacitance measured with power supply at 3.3 V; sampled only, not 100% tested

2.

At 25°C, f = 1 MHz

Min

Max

Unit

Input capacitance (SCL)

7

pF

(3)

3.

Output deselected.

Output capacitance (SDA,FT/OUT)

10

pF

Low-pass filter input time constant (SDA and SCL)

250

1000

ns

AI02568

0.8VCC

0.2VCC

0.7VCC

0.3VCC