TSH93

Macromodel

9/13

5

Macromodel

Please consider the following remarks before using this macromodel.

●

All models are a trade-off between accuracy and complexity (i.e. simulation time).

●

Macromodels are not a substitute to breadboarding; rather, they confirm the validity of

a design approach and help to select surrounding component values.

●

A macromodel emulates the nominal performance of a typical device within specified

operating conditions (temperature, supply voltage, for example). Thus the

macromodel is often not as exhaustive as the datasheet, its purpose is to illustrate the

main parameters of the product.

example), is not reliable in any way.

This macromodel applies to: TSH93I

** Standard Linear Ics Macromodels, 1997.

** CONNECTIONS :

* 1 INVERTING INPUT

* 2 NON-INVERTING INPUT

* 3 OUTPUT

* 4 POSITIVEPOWER SUPPLY

* 5 NEGATIVE POWER SUPPLY

.SUBCKT TSH93 1 3 2 4 5(analog)

********************************************************

.MODEL MDTH D IS=1E-8 KF=1.809064E-15 CJO=10F

* INPUT STAGE

CIP 2 5 1.000000E-12

CIN 1 5 1.000000E-12

EIP 10 5 2 5 1

EIN 16 5 1 5 1

RIP 10 11 2.600000E-01

RIN 15 16 2.600000E-01

RIS 11 15 3.645298E-01

DIP 11 12 MDTH 400E-12

DIN 15 14 MDTH 400E-12

VOFP 12 13 DC 0.000000E+00

VOFN 13 14 DC 0

IPOL 13 5 1.000000E-03

CPS 11 15 2.986990E-10

DINN 17 13 MDTH 400E-12

VIN 17 5 2.000000e+00

DINR 15 18 MDTH 400E-12

VIP 4 18 1.000000E+00

FCP 4 5 VOFP 3.500000E+00

FCN 5 4 VOFN 3.500000E+00

FIBP 2 5 VOFP 1.000000E-02

FIBN 5 1 VOFN 1.000000E-02

* AMPLIFYING STAGE

FIP 5 19 VOFP 2.530000E+02

FIN 5 19 VOFN 2.530000E+02