| 数据搜索系统,热门电子元器件搜索 |
|
FSUSB46 数据表(PDF) 1 Page - Fairchild Semiconductor |
|
|
|||||||||||||||||||||||||||||
FSUSB46 数据表(HTML) 1 Page - Fairchild Semiconductor |
|
1 / 2 page ![]() July 2008 © 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com FSUSB46 • Rev. 1.0.3 Click here for this datasheet translated into Chinese! FSUSB46 — Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated Charger Port Detection Features Low On Capacitance: 7.0pF Typical Low On Resistance: 3.9Ω Typical Low Power Consumption: 1μA Maximum - 15μA Maximum ICCT over an Expanded Voltage Range (VIN=1.8V, VCC=4.3V) Wide -3db Bandwidth: > 720MHz Packaged in Pb-free, 8-Lead MicroPak™ (1.6mm wide), US8 (3.1mm wide), and UMLP (1.4x1.4mm) 8kV ESD Rating, >16kV Power/GND ESD Rating Power-Off Protection on All Ports When VCC=0V - D+/D- Pins Tolerate up to 5.25V Applications Cell phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box IMPORTANT NOTE : For additional performance information, please contact analogswitch@fairchildsemi.com. Description The FSUSB46 is a bi-directional, low-power, Hi-Speed, USB2.0 switch. Configured as a double-pole, single- throw switch (DPST) switch, it is optimized for switching a Hi-Speed (480Mbps) source. The FSUSB46 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.9pF. The wide bandwidth of this device (720MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB46 contains special circuitry on the switch I/O pins for applications where the VCC supply is powered-off (VCC=0), which allows the device to withstand an over-voltage condition. This device is designed to minimize current consumption even when the control voltage applied to the /OE pin is lower than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications, such as cell phones, allowing for direct interface with the general- purpose I/Os of the baseband processor. An additional feature is the detection of the 1-1 (high/high) state on D+/D- to signal an interrupt (INT) to the processor when entering a dedicated charging port mode of operation. Ordering Information Part Number Operating Temperature Range Package Eco Status FSUSB46L8X -40 to +85°C 8-Lead MicroPak™ 1.6mm Wide RoHS FSUSB46K8X -40 to +85°C 8-Lead US8, JEDEC MO187, Variation CA 3.1mm Green FSUSB46UMX -40 to +85°C 8-Lead Ultrathin Molded Leadless Package (UMLP), 1.2 x 1.4mm Green For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. Figure 1. Analog Symbol |
类似零件编号 - FSUSB46 |
|
类似说明 - FSUSB46 |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |