| 数据搜索系统,热门电子元器件搜索 |
|
LNBP8K7-R 数据表(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LNBP8K7-R 数据表(HTML) 1 Page - STMicroelectronics |
|
1 / 13 page ![]() September 2006 Rev. 3 1/13 13 LNBP8 LNBP9 LNB Supply and control voltage regulator Feature summary ■ Simplest integrated solution for the LNB remote supply and control ■ 500mA Guaranteed output current ■ Dual input supply for reducing power dissipation ■ 22KHZ Built-in tone oscillator (LNBP9 version) ■ Fast oscillator start-up for DiSEqCTM encoding (LNBP9 version) ■ Auxiliary modulation input for more flexibility (LNBP8 version) ■ Stand-by function ■ Short circuit and overtemperature protection ■ Available in through-hole package Description Intended for analog and digital satellite receivers, the LNBP is a monolithic linear voltage regulator, assembled in PowerFlexTM, specifically designed to provide the powering voltages and the interfacing signals to the LNB down-converter. The regulator output can be logic controlled to be 13V or 18V (typ.) by mean of the VSEL pin for the remote controlling of the LNB. In order to reduce the power dissipation of the device when the lowest output voltage is selected, the regulator has 2 supply inputs (VCC1 and VCC2). They must be powered respectively at 15V (min.) and 22V (min.), and an internal switch will automatically select the appropriate supply voltage according to the selected output voltage. ..The TONE pin (only for the LNBP9 version) activates the internal oscillator so that the DC output is modulated by a 22KHz square wave. This internal oscillator is factory trimmed within a tolerance of +/- 2KHz, thus no further adjustment or external components are required. A burst coding of the 22KHz tone can be accomplished thanks to the fast response of the TONE input and the prompt oscillator start-up. This helps designers which want to implement the DiSEqCTM protocols. In order to improve design flexibility and to allow implementation of other LNB remote control standards, an analogic modulation input pin (EXTM) is available (LNBP8 version only). An appropriate DC blocking capacitor must be used to couple the modulating signal source to the EXTM pin. Both versions integrate thermal and short circuit protection. The device is packaged in PowerFlex for an easy through-hole mounting. If an adequate Heatsink is provided and higher power losses are acceptable, both supply pins can be powered by the same 23V source without affecting any other circuit performance. When the IC is powered and put in Stand-by (EN pin LOW), the regulator output is disabled and the IC power consumption is reduced to 300µA typ. SPAK-7L (PowerFlexTM) www.st.com Order code Part number Package Packaging SPAK-7L Tape & reel LNBP8 LNBP8K7 LNBP8K7-R LNBP9 LNBP9K7 LNBP9K7-R Obsolete Product(s) - Obsolete Product(s) |
类似零件编号 - LNBP8K7-R |
|
类似说明 - LNBP8K7-R |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |