Rev.2.00, Feb.18.2005, page 1 of 10

HD74LS192

Synchronous Up / Down Decade Counter (dual clock lines)

REJ03D0454–0200

Rev.2.00

Feb.18.2005

Synchronous operation is provided by having all flip-flops clocked simultaneously so that the output change

coincidently with each other when so instructed by the steering logic. This mode of operation eliminates the output

counting spikes which are normally associated with asynchronous (ripple clock) counters. The outputs of the four

master-slave flip-flops are triggered by a low-to-high-level transition of either count (clock) input. The direction of

counting is determined by which count input is pulsed while the other count input is high. This counter is fully

programmable; that is, each output may be preset to either level by desired data at the data inputs while the load inputs

is low. The output will change to agree with the data inputs independently of the count pulses. This feature allows the

counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs. A clear input

has been provided which forces all outputs to the low level when a high level is applied. The clear function is

independent of the count and load inputs. The clear, count, and load inputs are buffered to lower the drive requirements.

This reduces the number of clock drivers, etc., required for long words. This counter was designed to be cascaded

without the need for external circuitry. Both borrow and carry outputs are available to cascade both the up-and down-

counting functions.

The borrow output produces a pulse equal in width to the count-down input when the counter underflows. Similarly,

the carry output produces a pulse equal in width to the count up input when an overflow condition exists.

The counters can be easily cascaded by feeding the borrow and carry outputs to the count-down and count-up inputs

respectively of .the succeeding counter.

Features

• Ordering Information

Part Name

Package Type

Package Code

(Previous Code)

Package

Abbreviation

Taping Abbreviation

(Quantity)

HD74LS192P

DILP-16 pin

PRDP0016AE-B

(DP-16FV)

P

—

HD74LS192FPEL

SOP-16 pin (JEITA)

PRSP0016DH-B

(FP-16DAV)

FP

EL (2,000 pcs/reel)

Note:

Please consult the sales office for the above package availability.