STTH306

5/5

PACKAGE MECHANICAL DATA

DO-201AD

REF.

DIMENSIONS

NOTES

Millimeters

Inches

Min.

Max.

Min.

Max.

A

9.50

0.374

1 - The lead diameter

∅ D is not controlled over zone E

2 - The minimum length which must stay straight between

the right angles after bending is 0.59"(15 mm)

B

25.40

1.000

C

5.30

0.209

D

1.30

0.051

E

1.25

0.049

BA

E

E

ØD

ØD

ØC

B

note 2

note 1

note 1

Ordering code

Marking

Package

Weight

Base qty

Delivery mode

STTH306

STTH306

DO-201AD

1.12 g

600

Ammopack

STTH306RL

STTH306

DO-201AD

1.12 g

1900

Tape & reel

s

Epoxy meets UL 94,V0

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of

use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to

change without notice. This publication supersedes and replaces all information previously supplied.

STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap-

proval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

© 2001 STMicroelectronics - Printed in Italy - All rights reserved.

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia

Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.

http://www.st.com