5

SCD4404N Rev D 12/19/07

Aeroflex Plainview

Notes:

2. All typical values are measured at +25°C.

3. Characteristics guaranteed by design, not production tested.

4. Power ON/OFF, measured from 75KHz to 1MHz at Point A-A' Figure 4, in accordance with MIL-STD-1553B paragraph 4.5.2.2.2.3.

5. At point A-A' on Figure 3 or 4, 2.5µS after midpoint crossing of the parity bit of the last word of a 660 µS message.

6. Receiver skew is defined as the time from the rising edge of RX DATA OUT to the rising edge of RX DATA OUT minus 500 nS, with a

7. This test is performed while the Transceiver is reading its own transmission. This condition is called "Wraparound". Standard TTL loads

applied to RX DATA Outputs.

TYPICAL HYBRID POWER DISSIPATION

*

Power Supply Conditions

Condition

Standby

100% Duty

Cycle

Unit

PSC1

Bit Pattern = FFFF

HEX

Figure 4

0.540

2.167

Watts

PSC2

0.465

1.852

PSC3

0.450

1.600

Recommended Power Supply Voltage Range

+V

+11.4 Volts to +15.75 Volts

-V

-11.4 Volts to -15.75 Volts

Logic

+4.5 Volts to +5.5 Volts