 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
M35052 数据表(PDF) 29 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M35052 数据表(HTML) 29 Page - Renesas Technology Corp |
|
|
29 / 37 page  MITSUBISHI MICROCOMPUTERS M35052-XXXSP/FP SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS 28 (2) Before setting registers at the starting of system, be sure to reset __ the M35052-XXXSP/FP by applying “L” level to the AC pin. (3) Power supply noise When power supply noise is generated, the internal oscillator cir- cuit does not stabilize, whereby causing horizontal jitters across the picture display. Therefore, connect a bypass capacitor be- tween the power supply and GND. (4) Synchronous correction action When switching channel or in the special playback mode (quick playback, rewinding, and so on) of VTR, effect of synchronous correction becomes strong, and distortion of a character is apt to occur because the continuity of video signal is suddenly switched. When the continuity of video signal is out of order, erasure of displayed characters is recommended in a extreme short time to raise the quality of displayed characters. (5) Notes on fSC signal input This IC amplifies the subcarrier frequency (fSC) signal (NTSC, M- PAL system: 3.58MHz, PAL system: 4.43MHz) input to the OSCIN pin (17-pin) and generates the composite video signal internally. The amplified fSC signal can be destabilized in the following cases. a) When the fSC signal is outside of recommended operating con- ditions. b) When the waveform of the fSC signal is distorted. c) When DC level in the fSC waveform fluctuates. When the amplified signal is unstable, the composite video signal generated inside the IC is also unstable in terms of syn- chronization with the subcarrier and phase. Consequently, this results in color flicker and lost synchroniza- tion when the composite video signal is generated. Make note of the fact that this may prevent a stable blue background from being formed. (6) Forbidding to stop entering the fSC signal This IC doesn’t properly work if the fSC signal is not entered into the OSCIN pin (pin 17), so don’t stop the fSC signal so as to work the IC. To stop the IC, turn the display off (set 0 in the register DSPON (address F816).) (7) Forbidding to set data during the period in which the internal oscillation circuit stabilizes a) To start entering the fSC signal when its input is stopped. b) To start oscillating the oscillation circuit for display when its oscillation is stopped. (to assign “1” to the register STOP1 (ad- dress F816) when it is assigned “0”, or the like.) c) To turn on the internal bias when it is turned off. (to assign “1” to the register LEVEL1 (address F816) when it is assigned “0”.) There can be instances in which data are not properly set in the registers until the internal oscillation circuit stabilizes, so follow the steps in sequence as given below. 1) Set “0” in the register DSPON (address F816). (the display is turned off) 2) Effect the settings a), b), and c) given above. 3) Wait 20 ms (the period necessary for the internal oscillation cir- cuit to stabilize) before entering data. 4) Set necessary data in other registers, and make the display RAM ready. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
