H8SXSLASH1663 datasheet(797/1158 Pages) RENESAS

797 / 1158 page

Section 15 Serial Communication Interface (SCI, IrDA, CRC)

Rev.1.00 Jun. 07, 2006 Page 745 of 1102

REJ09B0294-0100

15.11.2

The CRC operation circuit has the following registers.

• CRC control register (CRCCR)

• CRC data input register (CRCDIR)

• CRC data output register (CRCDOR)

(1) CRC Control Register (CRCCR)

CRCCR initializes the CRC operation circuit, switches the operation mode, and selects the

generating polynomial.

Bit

Bit Name

Initial Value

R/W

DORCLR



LMS

R/W

Bit

Bit Name

Initial

Value

R/W

Description

DORCLR

CRCDOR Clear

Setting this bit to 1 clears CRCDOR to H'0000.

6 to 3

—

All 0

Reserved

The initial value should not be changed.

LMS

R/W

CRC Operation Switch

Selects CRC code generation for LSB-first or MSB-first

communication.

0: Performs CRC operation for LSB-first

communication. The lower byte (bits 7 to 0) is first

transmitted when CRCDOR contents (CRC code)

are divided into two bytes to be transmitted in two

parts.

1: Performs CRC operation for MSB-first

communication. The upper byte (bits 15 to 8) is first

transmitted when CRCDOR contents (CRC code)

are divided into two bytes to be transmitted in two

parts.

H8SX/1663 数据表(PDF) 797 Page - Renesas Technology Corp

H8SX/1663 数据表(HTML) 797 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载