H8SXSLASH1663 datasheet(1039/1158 Pages) RENESAS

1039 / 1158 page

Section 23 Power-Down Modes

Rev.1.00 Jun. 07, 2006 Page 987 of 1102

REJ09B0294-0100

23.8

Hardware Standby Mode

23.8.1

Transition to Hardware Standby Mode

When the

STBY pin is driven low, a transition is made to hardware standby mode from any mode.

In hardware standby mode, all functions enter the reset state and stop operation, resulting in a

significant reduction in power consumption. As long as the prescribed voltage is supplied, on-chip

RAM data is retained. I/O ports are set to the high-impedance state.

In order to retain on-chip RAM data, the RAME bit in SYSCR should be cleared to 0 before

driving the

STBY pin low. Do not change the state of the mode pins (MD2 to MD0) while this

LSI is in hardware standby mode.

23.8.2

Clearing Hardware Standby Mode

Hardware standby mode is cleared by means of the

STBY pin and the RES pin. When the STBY

pin is driven high while the

RES pin is low, the reset state is entered and clock oscillation is

started. Ensure that the

RES pin is held low until clock oscillation settles (for details on the

oscillation settling time, refer to table 23.2). When the

RES pin is subsequently driven high, a

transition is made to the program execution state via the reset exception handling state.

23.8.3

Hardware Standby Mode Timing

Figure 23.3 shows an example of hardware standby mode timing.

When the

STBY pin is driven low after the RES pin has been driven low, a transition is made to

hardware standby mode. Hardware standby mode is cleared by driving the

STBY pin high,

waiting for the oscillation settling time, then changing the

RES pin from low to high.

Oscillator

RES

STBY

Oscillation

settling time

Reset exception

handling

Figure 23.3 Hardware Standby Mode Timing

H8SX/1663 数据表(PDF) 1039 Page - Renesas Technology Corp

H8SX/1663 数据表(HTML) 1039 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载