TDA8214 datasheet(5/9 Pages) STMICROELECTRONICS

5 / 9 page

SL2

SL1

Video

Figure 1 : Synchronization Separator Circuit

GENERAL DESCRIPTION

The TDA8214B performs all the video and power

functions required to provide signals for the line

driver and frame yoke.

It contains:

- A synchronization separator

- An integrated frame separator without external

components

- A saw-tooth generator for the frame

- A power amplifier for direct drive of frame yoke

(short circuit protected)

- An open collector output for the line driver

- A line phase detector and a voltage control oscil-

lator

- A super sandcastle generator

- Video identification output.

The slice level of sync-separation is fixed by value

of the external resistors R1 and R2. VR is an

internally fixed voltage.

The sync-pulse allows the discharge of the capaci-

tor by a 2 x I current. A line sync-pulse is not able

to discharge the capacitor under VZ/2. A frame

sync-pulse permits the complete discharge of the

capacitor, so during the frame sync-pulse Q3 and

Q4 provide current for the other parts of the circuit.

ST2

ST1

SL1

Vz /2

Figure 2 : Frame Separator

TDA8214B

5/9

TDA8214 数据表(PDF) 5 Page - STMicroelectronics

TDA8214 数据表(HTML) 5 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9

数据表下载